Quick Installation Guide - TRENDnet
Quick Installation Guide - TRENDnet Quick Installation Guide - TRENDnet
3. Secure the mounting bracket to the pole mounting bracket using the nuts and washers provided. 4. Adjust the orientation of the antenna as necessary. 5. Once the unit is positioned correctly, tighten all screws. 8 ENGLISH FRANÇAIS DEUTSCH ESPAÑOL ÐÓÑÑÊÈÉ
ENGLISH FRANÇAIS DEUTSCH ESPAÑOL ÐÓÑÑÊÈÉ 4. Connecting TRENDnet External Antenna Note: Connecting a TRENDnet External Antenna to the TEW-455APBO requires the TEW-ASAL1. 1. Remove the metal cap from the connector labeled EXT. 2. Screw one end of the TEW-ASAL1 to the EXT connector on the TEW-455APBO. 3. Screw another cable (plug) connector to the external antenna that you expect to connect. Please screw both the connectors as tight as you can. 4. Use weather-proof tape to wrap the connectors. 9
- Page 1 and 2: Quick Installation Guide TEW-455APB
- Page 3 and 4: ENGLISH FRANÇAIS DEUTSCH ESPAÑOL
- Page 5 and 6: ENGLISH FRANÇAIS DEUTSCH ESPAÑOL
- Page 7 and 8: ENGLISH FRANÇAIS DEUTSCH ESPAÑOL
- Page 9: ENGLISH FRANÇAIS DEUTSCH ESPAÑOL
- Page 13 and 14: ENGLISH FRANÇAIS DEUTSCH ESPAÑOL
- Page 15 and 16: Trouble Shooting I am using a non-W
- Page 17: Product Warranty Registration Pleas
3. Secure the mounting bracket to the pole<br />
mounting bracket using the nuts and washers<br />
provided.<br />
4. Adjust the orientation of the antenna as<br />
necessary.<br />
5. Once the unit is positioned correctly, tighten all<br />
screws.<br />
8<br />
ENGLISH<br />
FRANÇAIS<br />
DEUTSCH<br />
ESPAÑOL<br />
ÐÓÑÑÊÈÉ
Change language