ECL Comfort 210/310, A275/A375 Installation Guide - Danfoss ...
ECL Comfort 210/310, A275/A375 Installation Guide - Danfoss ...
ECL Comfort 210/310, A275/A375 Installation Guide - Danfoss ...
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>Installation</strong> <strong>Guide</strong> <strong>ECL</strong> <strong>Comfort</strong> <strong>210</strong> / <strong>310</strong>, application <strong>A275</strong> / <strong>A375</strong><br />
3.2 Understanding the controller display<br />
This section describes the function in general for the <strong>ECL</strong> <strong>Comfort</strong><br />
<strong>210</strong> / <strong>310</strong> series. The shown displays are typical and not application<br />
related. They might differ from the displays in your application.<br />
Choosing a favorite display<br />
Your favorite display is the display you have chosen as the default<br />
display. The favorite display will give you a quick overview of the<br />
temperatures or units that you want to monitor in general.<br />
If the dial has not been activated for 20 min., the controller will<br />
revert to the overview display you have chosen as favorite.<br />
Heating circuit<br />
Overview display 1 informs about:<br />
actual outdoor temperature, controller mode,<br />
actual room temperature, desired room temperature.<br />
Overview display 2 informs about:<br />
actual outdoor temperature, trend in outdoor temperature,<br />
controller mode, max. and min. outdoor temperatures since<br />
midnight as well as desired room temperature.<br />
Overview display 3 informs about:<br />
date, actual outdoor temperature, controller mode, time, desired<br />
room temperature as well as shows the comfort schedule of the<br />
current day.<br />
Overview display 4 informs about:<br />
state of the controlled components, actual flow temperature,<br />
(desired flow temperature), controller mode, return temperature<br />
(limitation value).<br />
Dependent on the chosen display, the overview displays for the<br />
heating circuit inform you about:<br />
• actual outdoor temperature (-0.5)<br />
• controller mode ( )<br />
• actual room temperature (24.5)<br />
• desired room temperature (20.7 °C)<br />
• trend in outdoor temperature ( )<br />
• min. and max. outdoor temperatures since midnight ( )<br />
• date (23.02.2010)<br />
• time (7:43)<br />
• comfort schedule of the current day (0 - 12 - 24)<br />
• state of the controlled components (M2, P2)<br />
• actual flow temperature (49 °C), (desired flow temperature (31))<br />
• return temperature (24 °C) (limitation temperature (50))<br />
To shift between displays: Turn the dial until you reach the display<br />
selector ( ) at the bottom right side of the display. Push the dial and<br />
turn to choose your favorite overview display. Push the dial again.<br />
Overview display 1: Overview display 2:<br />
Overview display 3: Overview display 4:<br />
The setting of the desired room temperature is important even if a<br />
room temperature sensor / Remote Control Unit is not connected.<br />
<strong>Danfoss</strong> District Energy VI.GU.L1.02 DEN-SMT/DK 91