ECL Comfort 210/310, A275/A375 Installation Guide - Danfoss ...
ECL Comfort 210/310, A275/A375 Installation Guide - Danfoss ...
ECL Comfort 210/310, A275/A375 Installation Guide - Danfoss ...
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>Installation</strong> <strong>Guide</strong> <strong>ECL</strong> <strong>Comfort</strong> <strong>210</strong> / <strong>310</strong>, application <strong>A275</strong> / <strong>A375</strong><br />
2.3 Mounting<br />
2.3.1 Mounting the <strong>ECL</strong> <strong>Comfort</strong> controller<br />
For easy access, you should mount the <strong>ECL</strong> <strong>Comfort</strong> controller near<br />
the system. Select one of the following methods using the same<br />
base part (code no. 087H3220):<br />
• Mounting on a wall<br />
• Mounting on a DIN rail (35 mm)<br />
<strong>ECL</strong> <strong>Comfort</strong> <strong>210</strong> can be mounted in an <strong>ECL</strong> <strong>Comfort</strong> <strong>310</strong> base part<br />
(for future upgrade).<br />
Screws, PG cable glands and rawlplugs are not supplied.<br />
Locking the <strong>ECL</strong> <strong>Comfort</strong> controller<br />
In order to fasten the <strong>ECL</strong> <strong>Comfort</strong> controller to its base part, secure<br />
the controller with the locking pin.<br />
To prevent injuries to persons or the controller, the controller has to<br />
be securely locked into the base. For this purpose, press the locking<br />
pin into the base until a click is heard and the controller no longer<br />
can be removed from the base.<br />
If the controller is not securely locked into the base part, there is a risk<br />
that the controller during operation can unlock from the base and the<br />
base with terminals (and also the 230 V a.c. connections) are exposed.<br />
To prevent injuries to persons, always make sure that the controller<br />
is securely locked into its base. If this is not the case, the controller<br />
should not be operated!<br />
The easy way to lock the controller to its base or unlock it is to use a<br />
screw driver as lever.<br />
<strong>Danfoss</strong> District Energy VI.GU.L1.02 DEN-SMT/DK 43