DICOM Conformance Statement - InCenter - Philips

DICOM Conformance Statement Page 52 of 78
4.4.2. Parameters
The specification of important operational parameters, their default value and range ( if
configurable) is specified here.
Table 53: Configuration Parameters Table
Parameter Configurable Default Value
General Parameter
Maximum PDU receive size No -
Maximum PDU send size Yes 16384
Maximum number of simultaneous associations Yes 2
Artim TimeoutSpecifies the time in seconds of the ARTIM (Association
Request/Reject/Release TIMer).
Allowed values:
0: unlimited waiting time0 < n: real time in seconds
Yes 60 [seconds]
Automatic Association Timeout
Specifies the association inactivity timeout in seconds after
which the association is closed automatically.
Allowed values:
-1: immediate timeout0: unlimited waiting time0 < n: real time in
seconds
Yes 0 [unlimited]
Transfer Syntax support: ILE, ELE, EBE
Storage Specific Parameters
Yes ILE, ELE, EBE
Automatic export to a configurable destination Yes -
Background Air Suppression on/off Yes on
Storage Commitment Specific Parameters
Storage Commit Max Reply Waiting Time
Specifies the time in seconds that is waited for a storage
commitment event report message. After this time the association will
be terminated
Allowed values:
-1: immediate timeout
0: unlimited waiting time0 < n: real time in seconds
Yes -1
[asynchronous]
RIS query timeout
Basic Worklist Management Specific Parameters
Yes 240 [minutes]
Specifies the time after which the query is automatically
abortedAllowed values: 1- 300 minutes
Background broad query time interval
Yes 0 [no broad
Specifies the time until the background query will be repeated.
Allowed values:
0: no broad query0 < n: real time in minutes
query]
Print Management Specific Parameters
Automatic print to a configurable destination Yes -
© Koninklijke Philips Electronics N.V.
Document Number: XPR 031-090167.00 MammoDiagnost DR 1.0 18-March-2009