DICOM Conformance Statement - InCenter - Philips
DICOM Conformance Statement - InCenter - Philips DICOM Conformance Statement - InCenter - Philips
DICOM Conformance Statement Page 46 of 78 4.2.1.3.6.7. SOP Specific Conformance for Printer SOP Class of the Basic Grayscale Print Management Meta SOP Class This section includes the SOP specific behavior, i.e. error codes, error and exception handling, time-outs, etc. Behavior of an Application Entity SOP class is summarized as shown in next Table. The standard as well as the manufacturer specific status codes and their corresponding behavior are specified. 4.2.1.3.6.7.1. Dataset Specific Conformance for Printer N-EVENT-REPORT SCP Not applicable, since MammoDiagnost does not support N-EVENT-REPORT for printing. © Koninklijke Philips Electronics N.V. Document Number: XPR 031-090167.00 MammoDiagnost DR 1.0 18-March-2009
DICOM Conformance Statement Page 47 of 78 4.2.1.4. Association Acceptance Policy This section describes the conditions under which the AE will initiate an association. The behavior of the AE during association rejection is summarized in next table. • ELEVA AE accepts associations to allow remote applications to verify application level communication. • The ELEVA AE rejects association requests from unknown applications, i.e. applications that offer an unknown "calling AE title". An application is known if and only if it is defined per configuration. • The ELEVA AE rejects association requests from applications that do not address the ELEVA AE, i.e. that offer a wrong "called AE title". Table 47: Association Reject Reasons Result Source Reason/Diag Explanation 1 - rejected permanent 2 - Rejectedtransient 1 - DICOM UL service-user 2 - DICOM UL service provider (ACSE related 1 - no-Reasongiven 2 - applicationcontext-namenot-supported 3 - calling-AEtitle-notrecognized 7 - called-AEtitle-notrecognized 1 - no-reasongiven function) 2 - protocolversion-notsupported 3 - DICOM UL service 1 - temporary- provider (Presentation congestion related function) 2 - local-limitexceeded 1 - DICOM UL service-user 1 - no-Reasongiven 2 - applicationcontext-namenot-supported 3 - calling-AEtitle-notrecognized 7 - called-AEtitle-notrecognized 2 - DICOM UL service provider (ACSE related function) 3 - DICOM UL service provider (Presentation related function) 1 - no-reasongiven 2 - protocolversion-notsupported 1 - temporarycongestion 2 - local-limitexceeded Association is not established due to any problem other than that specified in the rows below. (Example: Problem while decoding the DICOM stream). An application context name other than 1.2.840.10008.3.1.1.1 is requested by the SCU during association. - The configuration does not contain a repository having the Calling AE Title as per the association request.- There is a problem in configuration (related to composing the configuration from the SCU and the SCP configuration). The called AE Title in the association request does not match the AE Title as per the configuration. Not used. Not used. Not used. Not used. Not used. Not used. Not used. Not used. Maximum number of associations is exceeded and an association request is received. Not used. Not used. Not used. © Koninklijke Philips Electronics N.V. Document Number: XPR 031-090167.00 MammoDiagnost DR 1.0 18-March-2009
- Page 1 and 2: DICOM Conformance Statement © Koni
- Page 3 and 4: DICOM Conformance Statement Page 3
- Page 5 and 6: 2. TABLE OF CONTENTS DICOM Conforma
- Page 7 and 8: 3. INTRODUCTION DICOM Conformance S
- Page 9 and 10: DICOM Conformance Statement Page 9
- Page 11 and 12: DICOM Conformance Statement Page 11
- Page 13 and 14: DICOM Conformance Statement Page 13
- Page 15 and 16: DICOM Conformance Statement Page 15
- Page 17 and 18: DICOM Conformance Statement Page 17
- Page 19 and 20: DICOM Conformance Statement Page 19
- Page 21 and 22: DICOM Conformance Statement Page 21
- Page 23 and 24: DICOM Conformance Statement Page 23
- Page 25 and 26: DICOM Conformance Statement Page 25
- Page 27 and 28: Service Status DICOM Conformance St
- Page 29 and 30: DICOM Conformance Statement Page 29
- Page 31 and 32: DICOM Conformance Statement Page 31
- Page 33 and 34: DICOM Conformance Statement Page 33
- Page 35 and 36: DICOM Conformance Statement Page 35
- Page 37 and 38: DICOM Conformance Statement Page 37
- Page 39 and 40: DICOM Conformance Statement Page 39
- Page 41 and 42: DICOM Conformance Statement Page 41
- Page 43 and 44: DICOM Conformance Statement Page 43
- Page 45: DICOM Conformance Statement Page 45
- Page 49 and 50: DICOM Conformance Statement Page 49
- Page 51 and 52: 4.3. Network Interfaces DICOM Confo
- Page 53 and 54: 5. MEDIA INTERCHANGE DICOM Conforma
- Page 55 and 56: DICOM Conformance Statement Page 55
- Page 57 and 58: 7. SECURITY 7.1. Security Profiles
- Page 59 and 60: 8. ANNEXES OF APPLICATION "ELEVA" 8
- Page 61 and 62: DICOM Conformance Statement Page 61
- Page 63 and 64: DICOM Conformance Statement Page 63
- Page 65 and 66: DICOM Conformance Statement Page 65
- Page 67 and 68: DICOM Conformance Statement Page 67
- Page 69 and 70: DICOM Conformance Statement Page 69
- Page 71 and 72: DICOM Conformance Statement Page 71
- Page 73 and 74: DICOM Conformance Statement Page 73
- Page 75 and 76: View Position 0018,5101 CS VNAP DIC
- Page 77 and 78: Number of Films 2100,0170 IS DICOM
<strong>DICOM</strong> <strong>Conformance</strong> <strong>Statement</strong> Page 47 of 78<br />
4.2.1.4. Association Acceptance Policy<br />
This section describes the conditions under which the AE will initiate an association.<br />
The behavior of the AE during association rejection is summarized in next table.<br />
• ELEVA AE accepts associations to allow remote applications to verify<br />
application level communication.<br />
• The ELEVA AE rejects association requests from unknown applications, i.e.<br />
applications that offer an unknown "calling AE title". An application is known if<br />
and only if it is defined per configuration.<br />
• The ELEVA AE rejects association requests from applications that do not<br />
address the ELEVA AE, i.e. that offer a wrong "called AE title".<br />
Table 47: Association Reject Reasons<br />
Result Source Reason/Diag Explanation<br />
1 - rejected<br />
permanent<br />
2 -<br />
Rejectedtransient<br />
1 - <strong>DICOM</strong> UL service-user<br />
2 - <strong>DICOM</strong> UL service<br />
provider (ACSE related<br />
1 - no-Reasongiven<br />
2 - applicationcontext-namenot-supported<br />
3 - calling-AEtitle-notrecognized<br />
7 - called-AEtitle-notrecognized<br />
1 - no-reasongiven<br />
function) 2 - protocolversion-notsupported<br />
3 - <strong>DICOM</strong> UL service 1 - temporary-<br />
provider (Presentation congestion<br />
related function) 2 - local-limitexceeded<br />
1 - <strong>DICOM</strong> UL service-user 1 - no-Reasongiven<br />
2 - applicationcontext-namenot-supported<br />
3 - calling-AEtitle-notrecognized<br />
7 - called-AEtitle-notrecognized<br />
2 - <strong>DICOM</strong> UL service<br />
provider (ACSE<br />
related function)<br />
3 - <strong>DICOM</strong> UL service<br />
provider<br />
(Presentation related<br />
function)<br />
1 - no-reasongiven<br />
2 - protocolversion-notsupported<br />
1 - temporarycongestion<br />
2 - local-limitexceeded<br />
Association is not established due to any<br />
problem other than that specified in the<br />
rows below.<br />
(Example: Problem while decoding<br />
the <strong>DICOM</strong> stream).<br />
An application context name other than<br />
1.2.840.10008.3.1.1.1 is requested by the<br />
SCU during association.<br />
- The configuration does not contain a<br />
repository having the Calling AE Title as<br />
per the association request.- There is a<br />
problem in configuration (related to<br />
composing the configuration from the SCU<br />
and the SCP configuration).<br />
The called AE Title in the association<br />
request does not match the AE Title as per<br />
the configuration.<br />
Not used.<br />
Not used.<br />
Not used.<br />
Not used.<br />
Not used.<br />
Not used.<br />
Not used.<br />
Not used.<br />
Maximum number of associations is<br />
exceeded and an association request is<br />
received.<br />
Not used.<br />
Not used.<br />
Not used.<br />
© Koninklijke <strong>Philips</strong> Electronics N.V.<br />
Document Number: XPR 031-090167.00 MammoDiagnost DR 1.0 18-March-2009