M12 Oncore Users Guide Supplement - deetc - isel
M12 Oncore Users Guide Supplement - deetc - isel M12 Oncore Users Guide Supplement - deetc - isel
Motorola GPS Products M12 Oncore User’s Guide Supplement Revision 1.0 01/25/00 UTC OFFSET STATUS This message allows the user to request the UTC offset that is currently being used in the time solution. The value reported is the integer number of seconds between UTC and GPS time. If the offset is zero, the receiver does not currently have the portion of the almanac that contains the UTC parameters. The UTC parameters are broadcast by the satellites as part of the almanac, which is repeated every 12.5 minutes. The message can be set to output either once (polled), or any time the UTC offset has been updated or changed from its previous value. Default mode: Polled 52
Input Command Response Message Motorola GPS Products M12 Oncore User’s Guide Supplement Revision 1.0 01/25/00 UTC OFFSET STATUS Motorola Binary Format • Request UTC Offset Status Message: @@BomC m mode 0 = output UTC offset once (polled) 1 = output UTC offset every time it is updated C checksum Message length: 8 bytes • To above command: @@BouC u UTC offset in seconds -128 ..+127 C checksum Message length: 8 bytes 53
- Page 1 and 2: M12 User’s Guide Supplement
- Page 3 and 4: General Characteristics Performance
- Page 5 and 6: 3. Mechanical 3.1 Mechanical Drawin
- Page 7 and 8: 5.2 Main power Motorola GPS Product
- Page 9 and 10: 8. Performance 8.1 Accuracy Motorol
- Page 11 and 12: 10. Serial I/O Messages 10.1 Soluti
- Page 13 and 14: Motorola GPS Products M12 Oncore Us
- Page 15 and 16: Input Command Response Message Moto
- Page 17 and 18: Input Command SATELLITE IGNORE LIST
- Page 19 and 20: Input Command Response Message Moto
- Page 21 and 22: Input Command Response Message Moto
- Page 23 and 24: Input Command Response Message Moto
- Page 25 and 26: Input Command POSITION-HOLD POSITIO
- Page 27 and 28: Input Command Response Message Moto
- Page 29 and 30: Input Command Response Message Moto
- Page 31 and 32: Input Command Response Message Moto
- Page 33 and 34: Input Command Response Message Moto
- Page 35 and 36: Input Command Response Message Moto
- Page 37 and 38: Input Command Response Message Moto
- Page 39 and 40: Input Command Response Message Moto
- Page 41 and 42: Input Command Response Message Moto
- Page 43 and 44: Input Command Response Message Moto
- Page 45 and 46: Input Command Response Message Moto
- Page 47 and 48: Input Command Response Message Moto
- Page 49 and 50: Input Command Response Message Moto
- Page 51: Input Command Response Message Moto
- Page 55 and 56: Input Command Response Message Moto
- Page 57 and 58: Input Command Response Message Moto
- Page 59 and 60: Input Command Response Message Moto
- Page 61 and 62: Input Command Response Message Moto
- Page 63 and 64: Input Command Response Message @ #
- Page 65 and 66: Input Command Response Message Moto
- Page 67 and 68: Input Command Response Message Moto
- Page 69 and 70: Input Command Response Message Moto
- Page 71 and 72: Input Command Response Message Moto
- Page 73 and 74: Input Command Response Message Moto
- Page 75 and 76: Input Command Response Message Moto
- Page 77 and 78: Input Command Response Message Moto
- Page 79 and 80: Input Command Response Message Moto
- Page 81 and 82: Input Command Response Message Moto
- Page 83 and 84: Response Message (Continued) Motoro
- Page 85 and 86: Motorola GPS Products M12 Oncore Us
- Page 87 and 88: Input Command Response Message Moto
- Page 89 and 90: Motorola GPS Products M12 Oncore Us
- Page 91 and 92: Input Command Response Message Moto
- Page 93 and 94: Output Command Motorola GPS Product
- Page 95 and 96: Input Command Response Message Moto
- Page 97 and 98: Input Command GPGLL (GEOGRAPHIC POS
- Page 99 and 100: Input Command Response Message Moto
- Page 101 and 102: Input Command Response Message Moto
Input Command<br />
Response Message<br />
Motorola GPS Products<br />
<strong>M12</strong> <strong>Oncore</strong> User’s <strong>Guide</strong> <strong>Supplement</strong><br />
Revision 1.0 01/25/00<br />
UTC OFFSET STATUS<br />
Motorola Binary Format<br />
• Request UTC Offset Status Message:<br />
@@BomC<br />
m mode 0 = output UTC offset once (polled)<br />
1 = output UTC offset every time it is updated<br />
C checksum<br />
Message length: 8 bytes<br />
• To above command:<br />
@@BouC<br />
u UTC offset in seconds -128 ..+127<br />
C checksum<br />
Message length: 8 bytes<br />
53
Change language