M12 Oncore Users Guide Supplement - deetc - isel

DOS Shell
dos
Exit to DOS
quit
Record GPS Data
record
Motorola GPS Products
M12 Oncore User’s Guide Supplement
Revision 1.0 01/25/00
COMMAND DESCRIPTIONS
Function This command temporarily exits the controller to
execute a DOS command.
Syntax dos
Example dos
Notes To return to the controller, type: exit
See Also None
Function Closes all open files, saves the current reference
point, closes the program and exits to DOS.
Syntax quit
Example quit
Notes None
See Also None
Function This command controls the opening and closing of
files for storing data.
Syntax record [alm | as8 | bin | evt | p12] (c)
Example record bin
record bin c
Notes The file is opened by using the record command and
files type. The file is closed by repeating the record
command and file type followed by a “c” or by
invoking the quit command, which closes all open
files. All data stored in the files is stored in either
comma-separated variable (CSV) format, Motorola
binary format, or ASCII text, depending on the file
type. The bin option stores all data from the receiver
in binary format. This command opens or closes the
file; it does not invoke the command requesting the
required data.
See Also None
128