посмотреть инструкцию - Фирменный интернет-магазин ...

16
1 2 3 4
5
6
7
8
9
EN
COOKING ZONES CONTROL
The cooking zones control is achieved by means
of rotary switches 1, 2, 3 and 4 set up on the
control panel of the cooker 5.
The graphic symbols above the rotary switches
indicate which cooking zone is controlled by the
selected rotary switch.
To switch on or regulate a cooking zone:
• Turn on the rotary switch clockwise or
counter clockwise 6
• Set up the rotary switch in the position 7
The rotary switches enable fluent heat supply to
the cooking zones.
The double field heating elements are steered by
the energy control with the integrated switch of the
outer field.
By means of the rotary switch 8 you can ensure
the fluent heat supply only to the inner cooking
zone. To switch off the outer field:
• Turn rotary switch clockwise against the
stop and let it go.
By this moment you can control the fluent heat
supply to both inner and outer cooking zones.
To switch off the cooking zones set up the rotary
switch 9 in the position «0»
To control the heat supply in case of the control
panel equipped with sunk rotary switches Push:
• Push the rotary switch slightly and let it go.
The rotary switch will come out of the control
panel.
To countersink the rotary switch:
• Push the rotary switch as far as it will go
and let it go