VisionPRO™ 8000 Touchscreen Programmable Thermostat

VisionPRO TM 8000 Touchscreen Programmable Thermostat
2. Press and hold the center blank key for approximately
five seconds until the screen changes.
SYSTEM
EM HEAT
OFF
COOL
TUE
CHANGE FILTER UV LAMP HUMIDIFIER PAD
Inside Set To
PM
Following
Schedule
DONE CANCEL
M22439
3. Release the center blank key when the screen on the
thermostat matches the screen below.
DONE
M22440
68-0280 22
4. See the screen below to review how the thermostat
keys are used during the User Setup. See Table 5 for
the User Setup numbers and settings.
5. Press the Done key to exit the User Setup screen.
User
Setup
Number
USER SETUP
NUMBER
DONE O
PRESS TO EXIT
USER SETUP
0120 Date (first two
digits of year)
0130 Date (last two
digits of year)
Table 5. User Setup Settings.
User Setup
Name Settings
Select first two digits of
current calendar year (20
for year 2005, etc)
Select last two digits of
current calendar year (05
for year 2005, etc)
0140 Date (month) Select number of current
calendar month (1-12)
0150 Date (day) Select number of current
calendar date (1-31)
0160 Schedule options 0—Non-programmable
4—7-day programmable
(factory setting)
0320 Display
temperature
in °F or °C
MON WED THU U
FRI SAT AT A SUN
0330 Daylight savings
time
ADVANCE TO NEXT
USER SETUP
CURRENT
SETTING
CHANGE THE
CURRENT
SETTING M19922
0—°F setting (factory
setting)
1—°C setting
1—Daylight savings is on
(factory setting)
0—Daylight savings is off