SERVICE BULLETIN REFRIGERATION

More documents

Recommendations

Info

j) Warm up the 50 mm heat shrink tubing to insulate the cables with the junctions. k) Fit the new sensor into its original housing. The exceeding cable must be properly positioned. FAULTY TEMPERATURE SENSOR 36/39
Appendix KIT D REPLACEMENT PROCEDURE FOR APPLIANCES WITH A D – 50286485003 KIT Warning! Unplug the appliance, before carrying out the operations. a) Remove the drawers and/or the shelves from the inside of the appliance. b) Remove the protection grid of the temperature sensor. Note: the protection grid might be different according to the appliance. d) Cut the cable of the faulty temperature sensor. c) Remove the faulty temperature sensor. e) Cut and remove the sleeve according to the measures shown in the figure. FAULTY TEMPERATURE SENSOR 37/39 5 5
Page 1 and 2: FAULTY TEMPERATURE SENSOR Electroni
Page 3 and 4: INVOLVED MODELS Tab. A Faulty tempe
Page 5 and 6: Faulty temperature sensor PNC DATE
Page 25 and 26: Appendix KIT A1 REPLACEMENT PROCEDU
Page 27 and 28: f) Cut and remove the end of the sl
Page 29 and 30: Note: The new electronic board uses
Page 31 and 32: d) Cut the cable of the faulty temp
Page 33 and 34: n) Fit the new sensor into the cove
Page 35: f) Insert the cable into the 50 mm
Page 39: l) Fit the new sensor into its orig

SERVICE BULLETIN REFRIGERATION

Create successful ePaper yourself

Delete template?

Save as template?