HP LaserJet M1005 MFP user guide - ENWW
HP LaserJet M1005 MFP user guide - ENWW
HP LaserJet M1005 MFP user guide - ENWW
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Control-panel messages<br />
The majority of the control-panel messages are intended to <strong>guide</strong> the <strong>user</strong> through typical operation.<br />
The control-panel messages indicate the status of the current operation, and include a page count on<br />
the second line of the display, if appropriate. When the device is receiving print data or scanning<br />
commands, control-panel messages indicate this status. In addition, alert messages, warning<br />
messages, and critical error messages indicate situations that might require some action.<br />
Alert and warning messages<br />
Alert and warning messages appear temporarily and might require the <strong>user</strong> to acknowledge the<br />
message by pressing Menu/Enter to resume or by pressing Cancel to cancel the job. With certain<br />
warnings, the job might not complete or the print quality might be affected. If the alert or warning<br />
message is related to printing and the auto-continue feature is on, the device will attempt to resume<br />
the printing job after the warning has appeared for 10 seconds without acknowledgement.<br />
Alert and warning message tables<br />
Control panel message Description Recommended action<br />
Device error Press [OK] The device experienced an internal<br />
communication error.<br />
Jam in print paper path<br />
alternates with<br />
Open door and clear jam<br />
The device has detected a jam in the paper<br />
path.<br />
Page too complex Press [OK] The device could not print the current page<br />
because of its complexity.<br />
Printer jam clear paper path The device has detected a jam in the input<br />
trays.<br />
This is a warning message only. Job output<br />
might be affected.<br />
Clear the jam from the area indicated on<br />
the device control panel, and then follow<br />
the control panel instructions. See Clearing<br />
jams.<br />
Press Menu/Enter to clear the message.<br />
Allow the device to finish the job, or press<br />
Cancel to cancel the job.<br />
Clear the jam from the area indicated on<br />
the device control panel, and then follow<br />
the control panel instructions. See Clearing<br />
jams.<br />
Settings cleared The device has cleared job settings. Re-enter any appropriate job settings.<br />
82 Chapter 9 Problem solving <strong>ENWW</strong>