HP LaserJet M1005 MFP user guide - ENWW
HP LaserJet M1005 MFP user guide - ENWW
HP LaserJet M1005 MFP user guide - ENWW
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
2. Clean the white document lid backing by using a soft cloth or sponge that has been moistened<br />
with a mild soap and warm water.<br />
3. Wash the backing gently to loosen debris; do not scrub the backing.<br />
4. Dry the backing by using a chamois or soft cloth.<br />
CAUTION Do not use paper-based wipes because they might scratch the backing.<br />
5. If this does not clean the backing well enough, repeat the previous steps and use isopropyl<br />
alcohol to dampen the cloth or sponge, and then wipe the backing thoroughly with a damp cloth<br />
to remove any residual alcohol.<br />
To clean the paper path<br />
The device features a special cleaning mode to clean the paper path.<br />
1. On the device control panel, press Menu/Enter.<br />
2. Use the < or the > button to select Service, and then press Menu/Enter.<br />
3. Use the < or the > button to select Cleaning Mode, and then press Menu/Enter.<br />
A page feeds through the device slowly. Discard the page when the process is completed.<br />
4. Load plain letter or A4 paper when you are prompted.<br />
5. Press Menu/Enter again to confirm and begin the cleaning process.<br />
A page feeds through the device slowly. Discard the page when the process is completed.<br />
70 Chapter 8 Managing and maintaining the device <strong>ENWW</strong>
Change language