HP LaserJet M1005 MFP user guide - ENWW
HP LaserJet M1005 MFP user guide - ENWW
HP LaserJet M1005 MFP user guide - ENWW
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Changing the number of copies<br />
You can choose to have the default number of copies be any number from 1 to 99.<br />
To change the number of copies for the current job<br />
1. On the device control panel, press # Copies.<br />
2. Use the < or the > button to adjust the number of copies, and then press Menu/Enter.<br />
3. Press Start Copy.<br />
NOTE The change in the setting remains active for about two minutes after the copy job<br />
has been completed. During this time, Settings=Custom appears on the device controlpanel<br />
display.<br />
To change the default number of copies<br />
1. On the device control panel, press Menu/Enter.<br />
2. Use the < or the > button to select Copy setup, and then press Menu/Enter.<br />
3. Use the < or the > button to select Def. # of copies, and then press Menu/Enter.<br />
4. Use the < or the > button to adjust the number of copies (between 1 and 99) that you want as<br />
the default.<br />
5. Press Menu/Enter to save the selection.<br />
NOTE The factory-set default for the number of copies is 1.<br />
<strong>ENWW</strong> Changing the number of copies 49