HP LaserJet M1005 MFP user guide - ENWW

More documents

Recommendations

Info

Adjusting the lighter/darker (contrast) setting The lighter/darker setting affects the lightness or darkness (contrast) of the copy. Use the following procedure to change the contrast for the current copy job only. To adjust the lighter/darker setting for the current job 1. On the device control panel, press Lighter/Darker to see the current contrast setting. 2. Use the < or the > button to adjust the setting. Move the slider to the left to make the copy lighter than the original, or move the slider to the right to make the copy darker than the original. 3. Press Start Copy to save the selection and immediately start the copy job, or press Menu/Enter to save the selection without starting the job. NOTE The change in the setting remains active for about two minutes after the copy job has been completed. During this time, Settings=Custom appears on the device controlpanel display. To adjust the default lighter/darker setting NOTE The default lighter/darker setting affects all copy jobs. 1. On the device control panel, press Menu/Enter. 2. Use the < or the > button to select Copy setup, and then press Menu/Enter. 3. Use the < or the > button to select Def. Light/dark, and then press Menu/Enter. 4. Use the < or the > button to adjust the setting. Move the slider to the left to make all of the copies lighter than the original, or move the slider to the right to make all of the copies darker than the original. 5. Press Menu/Enter to save the selection. 46 Chapter 6 Copy <strong>ENWW</strong>
Reducing or enlarging copies The device can reduce copies to as little as 25% of the original size or enlarge copies to as much as 400% of the original size. Reduction/enlargement settings ● Original=100% ● A4 > Ltr=94% ● Ltr > A4=97% ● Full page=91% ● 2 pages/sheet ● 4 pages/sheet ● Custom: 25-400% NOTE For information about using the 2 pages/sheet or 4 pages/sheet setting, see Copying multiple pages on one sheet of paper. Adjusting the copy size To reduce or enlarge copies for the current job 1. On the device control panel, press More Copy Settings. 2. Use the < or the > button to select Reduce/Enlarge, and then press Menu/Enter. 3. Use the < or the > button to select the size to which you would like to reduce or enlarge the copies in this job. NOTE If you select Custom: 25-400%, use the < or the > button to adjust the percentage. 4. Press Start Copy to save the selection and immediately start the copy job, or press Menu/Enter to save the selection without starting the job. NOTE The change in the setting remains active for about two minutes after the copy job has been completed. During this time, Settings=Custom appears on the device control-panel display. You must change the default media size in the media input tray to match the output size, or part of your copy might be cut off. <strong>ENWW</strong> Reducing or enlarging copies 47
Page 1:
HP LaserJet M1005 MFP User Guide
Page 4 and 5:
Copyright and License © 2006 Copyr
Page 6 and 7: Envelope storage ..................
Page 8 and 9: Output bin ........................
Page 10 and 11: viii ENWW
Page 12 and 13: Device features Print ● Prints le
Page 14 and 15: Control panel 1 2 3 4 9 8 5 6 7 1 C
Page 16 and 17: Minimum system requirements In orde
Page 18 and 19: Printer driver The device comes wit
Page 20 and 21: Software for Windows See the gettin
Page 22 and 23: 12 Chapter 2 Software ENWW
Page 24 and 25: General guidelines Some media might
Page 26 and 27: Guidelines for using media The foll
Page 28 and 29: Envelopes HP recommends that you pr
Page 30 and 31: Letterhead and preprinted forms Let
Page 32 and 33: Table 3-2 Tray 1 specifications Med
Page 34 and 35: 24 Chapter 3 Media specifications E
Page 36 and 37: Loading media The following section
Page 38 and 39: Controlling print jobs This section
Page 40 and 41: To change the default media type 1.
Page 42 and 43: Using features in the Windows print
Page 44 and 45: Setting a custom paper size from th
Page 46 and 47: 4. After one side has been printed,
Page 48 and 49: Printing a cover page (Macintosh) I
Page 50 and 51: 6. Maintaining the same orientation
Page 52 and 53: Canceling a print job If a print jo
Page 54 and 55: Starting a copy job To make copies
Page 58 and 59: To adjust the default copy size NOT
Page 60 and 61: Copying onto media of different typ
Page 62 and 63: Copying two-sided documents Copying
Page 64 and 65: Copying photos and books To copy a
Page 66 and 67: 56 Chapter 6 Copy ENWW
Page 68 and 69: Understanding scanning methods You
Page 70 and 71: Scanning by using other software Th
Page 72 and 73: 2. Gently close the lid. 3. Gently
Page 74 and 75: Resolution and color guidelines The
Page 76 and 77: Information pages Information pages
Page 78 and 79: Outside the United States, you can
Page 80 and 81: 2. Clean the white document lid bac
Page 82 and 83: 4. Insert the cartridge into the de
Page 84 and 85: Problem-solving checklist Step numb
Page 86 and 87: Clearing jams This section contains
Page 88 and 89: Input trays CAUTION Do not use shar
Page 90 and 91: Output bin CAUTION Do not use sharp
Page 92 and 93: Control-panel messages The majority
Page 94 and 95: Control panel message Description R
Page 96 and 97: 3. Click Properties, or click Print
Page 98 and 99: Problem Cause Solution Toner smears
Page 100 and 101: Problem Cause Solution Toner appear
Page 102 and 103: Problem Cause Solution The device d
Page 104 and 105: Problem Cause Solution Black dots o
Page 106 and 107:
Performance problems Problem Cause
Page 108 and 109:
Scan-quality problems Preventing pr
Page 110 and 111:
Solving common Macintosh problems P
Page 112 and 113:
Problem-solving tools The section d
Page 114 and 115:
Supplies Product name Description P
Page 116 and 117:
106 Appendix A Accessories and orde
Page 118 and 119:
Hewlett-Packard limited warranty st
Page 120 and 121:
Availability of support and service
Page 122 and 123:
Guidelines for repacking the device
Page 124 and 125:
Physical specifications Table C-1 P
Page 126 and 127:
116 Appendix C Device specification
Page 128 and 129:
FCC compliance This equipment has b
Page 130 and 131:
HP LaserJet printing supplies It's
Page 132 and 133:
Declaration of conformity Declarati
Page 134 and 135:
Finnish laser statement LASERTURVAL
Page 136 and 137:
USB Universal serial bus (USB) is a
Page 138 and 139:
default media size and type, settin
Page 140 and 141:
troubleshooting Macintosh 100 types
Page 142:
selecting trays by 28 specification
show all

HP LaserJet M1005 MFP user guide - ENWW

Create successful ePaper yourself

Delete template?

Save as template?