HP LaserJet M1005 MFP user guide - ENWW
HP LaserJet M1005 MFP user guide - ENWW HP LaserJet M1005 MFP user guide - ENWW
Starting a copy job To make copies with the device, use the following instructions. 1. Lift the scanner lid, and then load your document face-down (one page at a time) with the upperleft corner of the document located in the lower-right corner of the scanner glass. 2. Press Start Copy on the device control panel to start copying. 3. Repeat the process for each copy. For more detailed instructions about loading documents to copy, see Loading documents to copy or scan. Canceling a copy job To cancel a copy job, press Cancel on the device control panel. If more than one process is running, pressing Cancel clears the process that currently appears on the control-panel display. NOTE If you cancel a copy job, remove the document from the flatbed scanner. Adjusting the copy quality Five copy-quality settings are available: Draft,Text, Mixed, Film photo, and Picture. ● Text: This setting is the best for items that contain mostly text. This is the default setting. ● Film photo: This setting is the best for photographs. ● Picture: This setting is the best for graphics. ● Mixed: This setting is the best for documents that include both text and graphics. ● Draft: This setting is the best for conserving toner. 44 Chapter 6 Copy ENWW
To adjust the copy quality for the current job 1. On the device control panel, press More Copy Settings twice to see the current quality setting for the copy. 2. Use the < or the > button to scroll through the quality setting options. 3. Select a setting, and then press Start Copy to save the selection and immediately start the copy job, or press Menu/Enter to save the selection without starting the job. NOTE The change in the setting remains active for about two minutes after the copy job has been completed. During this time, Settings=Custom appears on the device controlpanel display. To adjust the default copy quality 1. On the device control panel, press Menu/Enter. 2. Use the < or the > button to select Copy setup, and then press Menu/Enter. 3. Press Menu/Enter to select Default Quality. 4. Use the < or the > button to scroll through the choices. 5. Press Menu/Enter to save the selection. ENWW Adjusting the copy quality 45
- Page 4 and 5: Copyright and License © 2006 Copyr
- Page 6 and 7: Envelope storage ..................
- Page 8 and 9: Output bin ........................
- Page 10 and 11: viii ENWW
- Page 12 and 13: Device features Print ● Prints le
- Page 14 and 15: Control panel 1 2 3 4 9 8 5 6 7 1 C
- Page 16 and 17: Minimum system requirements In orde
- Page 18 and 19: Printer driver The device comes wit
- Page 20 and 21: Software for Windows See the gettin
- Page 22 and 23: 12 Chapter 2 Software ENWW
- Page 24 and 25: General guidelines Some media might
- Page 26 and 27: Guidelines for using media The foll
- Page 28 and 29: Envelopes HP recommends that you pr
- Page 30 and 31: Letterhead and preprinted forms Let
- Page 32 and 33: Table 3-2 Tray 1 specifications Med
- Page 34 and 35: 24 Chapter 3 Media specifications E
- Page 36 and 37: Loading media The following section
- Page 38 and 39: Controlling print jobs This section
- Page 40 and 41: To change the default media type 1.
- Page 42 and 43: Using features in the Windows print
- Page 44 and 45: Setting a custom paper size from th
- Page 46 and 47: 4. After one side has been printed,
- Page 48 and 49: Printing a cover page (Macintosh) I
- Page 50 and 51: 6. Maintaining the same orientation
- Page 52 and 53: Canceling a print job If a print jo
- Page 56 and 57: Adjusting the lighter/darker (contr
- Page 58 and 59: To adjust the default copy size NOT
- Page 60 and 61: Copying onto media of different typ
- Page 62 and 63: Copying two-sided documents Copying
- Page 64 and 65: Copying photos and books To copy a
- Page 66 and 67: 56 Chapter 6 Copy ENWW
- Page 68 and 69: Understanding scanning methods You
- Page 70 and 71: Scanning by using other software Th
- Page 72 and 73: 2. Gently close the lid. 3. Gently
- Page 74 and 75: Resolution and color guidelines The
- Page 76 and 77: Information pages Information pages
- Page 78 and 79: Outside the United States, you can
- Page 80 and 81: 2. Clean the white document lid bac
- Page 82 and 83: 4. Insert the cartridge into the de
- Page 84 and 85: Problem-solving checklist Step numb
- Page 86 and 87: Clearing jams This section contains
- Page 88 and 89: Input trays CAUTION Do not use shar
- Page 90 and 91: Output bin CAUTION Do not use sharp
- Page 92 and 93: Control-panel messages The majority
- Page 94 and 95: Control panel message Description R
- Page 96 and 97: 3. Click Properties, or click Print
- Page 98 and 99: Problem Cause Solution Toner smears
- Page 100 and 101: Problem Cause Solution Toner appear
- Page 102 and 103: Problem Cause Solution The device d
To adjust the copy quality for the current job<br />
1. On the device control panel, press More Copy Settings twice to see the current quality setting<br />
for the copy.<br />
2. Use the < or the > button to scroll through the quality setting options.<br />
3. Select a setting, and then press Start Copy to save the selection and immediately start the copy<br />
job, or press Menu/Enter to save the selection without starting the job.<br />
NOTE The change in the setting remains active for about two minutes after the copy job<br />
has been completed. During this time, Settings=Custom appears on the device controlpanel<br />
display.<br />
To adjust the default copy quality<br />
1. On the device control panel, press Menu/Enter.<br />
2. Use the < or the > button to select Copy setup, and then press Menu/Enter.<br />
3. Press Menu/Enter to select Default Quality.<br />
4. Use the < or the > button to scroll through the choices.<br />
5. Press Menu/Enter to save the selection.<br />
<strong>ENWW</strong> Adjusting the copy quality 45