HP LaserJet M1005 MFP user guide - ENWW
HP LaserJet M1005 MFP user guide - ENWW HP LaserJet M1005 MFP user guide - ENWW
Declaration of conformity Declaration of Conformity according to ISO/IEC Guide 22 and EN 45014 Manufacturer's Name: Hewlett-Packard Company Manufacturer's Address: 11311 Chinden Boulevard, Boise, Idaho 83714-1021, USA declares, that the product Product Names: HP LaserJet M1005 MFP series Regulatory Model Number3) BOISB-0207-01 Print Cartridge Q2612A Product Options: ALL conforms to the following Product Specifications: Safety: IEC 60950-1:2001 / EN60950-1: 2001 +A11 IEC 60825-1:1993 +A1 +A2 EN 60825-1:1994 +A1 +A2 (Class 1 Laser/LED Product) GB4943-2001 EMC: CISPR22:2003 +A1 / EN55022:2005 - Class B1) EN 61000-3-2:2000 EN 61000-3-3:1995 +A1 EN 55024:1998 +A1 +A2 FCC Title 47 CFR, Part 15 Class B2) / ICES-003, Issue 4 GB9254-1998, GB17625.1-2003 Supplementary Information: The product herewith complies with the requirements of the EMC Directive 89/336/EEC and the Low Voltage Directive 73/23/EEC, and carries the CE-Marking accordingly. 1) The product was tested in a typical configuration with Hewlett-Packard Personal Computer Systems. 2) This Device complies with Part 15 of the FCC Rules. Operation is subject to the following two Conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. 3) For regulatory purposes, this product is assigned a Regulatory model number. This number should not be confused with the marketing name or the product number(s). Boise, Idaho 83713, USA January 1, 2006 For regulatory topics only: Australia Contact: Product Regulations Manager, Hewlett-Packard Australia Ltd., 31-41 Joseph Street, Blackburn, Victoria 3130, Australia European Contact: Your Local Hewlett-Packard Sales and Service Office or Hewlett-Packard GmbH, Department HQ-TRE / Standards Europe, Herrenberger Strasse 140, Böblingen, D-71034, Germany, (FAX: +49-7031-14-3143) USA Contact: Product Regulations Manager, Hewlett-Packard Company, PO Box 15, Mail Stop 160, Boise, Idaho 83707-0015, USA, (Phone: 208-396-6000) 122 Appendix D Regulatory information ENWW
Country-/region-specific safety statements Laser safety statement The Center for Devices and Radiological Health (CDRH) of the U.S. Food and Drug Administration has implemented regulations for laser products manufactured since August 1, 1976. Compliance is mandatory for products marketed in the United States. The printer is certified as a "Class 1" laser product under the U.S. Department of Health and Human Services (DHHS) Radiation Performance Standard according to the Radiation Control for Health and Safety Act of 1968. Since radiation emitted inside the printer is completely confined within protective housings and external covers, the laser beam cannot escape during any phase of normal user operation. WARNING! Using controls, making adjustments, or performing procedures other than those specified in this user guide may result in exposure to hazardous radiation. Canadian DOC statement Complies with Canadian EMC Class B requirements. «Conforme à la classe B des normes canadiennes de compatibilité électromagnétiques (CEM).» Korean EMI statement ENWW Country-/region-specific safety statements 123
- Page 82 and 83: 4. Insert the cartridge into the de
- Page 84 and 85: Problem-solving checklist Step numb
- Page 86 and 87: Clearing jams This section contains
- Page 88 and 89: Input trays CAUTION Do not use shar
- Page 90 and 91: Output bin CAUTION Do not use sharp
- Page 92 and 93: Control-panel messages The majority
- Page 94 and 95: Control panel message Description R
- Page 96 and 97: 3. Click Properties, or click Print
- Page 98 and 99: Problem Cause Solution Toner smears
- Page 100 and 101: Problem Cause Solution Toner appear
- Page 102 and 103: Problem Cause Solution The device d
- Page 104 and 105: Problem Cause Solution Black dots o
- Page 106 and 107: Performance problems Problem Cause
- Page 108 and 109: Scan-quality problems Preventing pr
- Page 110 and 111: Solving common Macintosh problems P
- Page 112 and 113: Problem-solving tools The section d
- Page 114 and 115: Supplies Product name Description P
- Page 116 and 117: 106 Appendix A Accessories and orde
- Page 118 and 119: Hewlett-Packard limited warranty st
- Page 120 and 121: Availability of support and service
- Page 122 and 123: Guidelines for repacking the device
- Page 124 and 125: Physical specifications Table C-1 P
- Page 126 and 127: 116 Appendix C Device specification
- Page 128 and 129: FCC compliance This equipment has b
- Page 130 and 131: HP LaserJet printing supplies It's
- Page 134 and 135: Finnish laser statement LASERTURVAL
- Page 136 and 137: USB Universal serial bus (USB) is a
- Page 138 and 139: default media size and type, settin
- Page 140 and 141: troubleshooting Macintosh 100 types
- Page 142: selecting trays by 28 specification
Declaration of conformity<br />
Declaration of Conformity<br />
according to ISO/IEC Guide 22 and EN 45014<br />
Manufacturer's Name: Hewlett-Packard Company<br />
Manufacturer's Address: 11311 Chinden Boulevard,<br />
Boise, Idaho 83714-1021, USA<br />
declares, that the product<br />
Product Names: <strong>HP</strong> <strong>LaserJet</strong> <strong>M1005</strong> <strong>MFP</strong> series<br />
Regulatory Model Number3) BOISB-0207-01<br />
Print Cartridge Q2612A<br />
Product Options: ALL<br />
conforms to the following Product Specifications:<br />
Safety: IEC 60950-1:2001 / EN60950-1: 2001 +A11<br />
IEC 60825-1:1993 +A1 +A2<br />
EN 60825-1:1994 +A1 +A2 (Class 1 Laser/LED Product)<br />
GB4943-2001<br />
EMC: CISPR22:2003 +A1 / EN55022:2005 - Class B1) EN 61000-3-2:2000<br />
EN 61000-3-3:1995 +A1<br />
EN 55024:1998 +A1 +A2<br />
FCC Title 47 CFR, Part 15 Class B2) / ICES-003, Issue 4<br />
GB9254-1998, GB17625.1-2003<br />
Supplementary Information:<br />
The product herewith complies with the requirements of the EMC Directive 89/336/EEC and the Low Voltage Directive 73/23/EEC, and<br />
carries the CE-Marking accordingly.<br />
1) The product was tested in a typical configuration with Hewlett-Packard Personal Computer Systems.<br />
2) This Device complies with Part 15 of the FCC Rules. Operation is subject to the following two Conditions: (1) this device may not cause<br />
harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.<br />
3) For regulatory purposes, this product is assigned a Regulatory model number. This number should not be confused with the marketing<br />
name or the product number(s).<br />
Boise, Idaho 83713, USA<br />
January 1, 2006<br />
For regulatory topics only:<br />
Australia Contact: Product Regulations Manager, Hewlett-Packard Australia Ltd., 31-41 Joseph Street, Blackburn, Victoria 3130,<br />
Australia<br />
European Contact: Your Local Hewlett-Packard Sales and Service Office or Hewlett-Packard GmbH, Department HQ-TRE /<br />
Standards Europe, Herrenberger Strasse 140, Böblingen, D-71034, Germany, (FAX: +49-7031-14-3143)<br />
USA Contact: Product Regulations Manager, Hewlett-Packard Company, PO Box 15, Mail Stop 160, Boise, Idaho 83707-0015,<br />
USA, (Phone: 208-396-6000)<br />
122 Appendix D Regulatory information <strong>ENWW</strong>
Change language