T-FLEX Parametric CAD. Fundamentals. 2D Design

Active Drawing Window
The T-FLEX CAD allows the user to work with several documents
simultaneously. There is a separate window for each open document.
This allows working simultaneously with several drawings or 3D
models, switching from one document window to another as
required.
The commands designed for working with document windows are
grouped in the submenu “Window” found in the textual menu.
Document tabs
Main Concepts of System Operation
For controlling windows the document tabs can be used. Visibility of the tabs is controlled by the flag
“Customize|Tool Windows|Document Tabs”. By using these tabs it is possible to switch from one
open document window of the T-FLEX CAD into another – for this purpose it is sufficient to point the
cursor at the desired tab and click . Also, with the help of tabs it is possible to change the arrangement of
document windows. To do that, the cursor of the mouse should point at the tab of the document which needs
to be moved. Then should be clicked, and without releasing the pressed mouse, the tab of the document
should be moved to the required location in the row of tabs.
By default the document tabs (if they are visible in the T-FLEX CAD window) are placed above the upper
border of the document window. Their location can be changed if desired. For that, it is necessary to point at
the tab of any document with the cursor and with the help of call the context menu.
Document Window View with Turned on/off Document Tabs
The view of the open documents with turned on tabs is different from that with turned off tabs.
91