T-FLEX Parametric CAD. Fundamentals. 2D Design

Two-dimensional design
Performing Conversion
758
After forming the list of converted files, press the button [Next>] in the right part of the converter window.
After pressing this button, the contents of the upper left area of the converter window will be modified. The
list of the converted files will be replaced by the list of the T-FLEX CAD libraries. At this stage, a user has
to indicate the elements of which libraries should be subject to transformation, if they are found in the
structure of the converted documents. The libraries the elements of which can be converted are marked with
a “tick” in the list of the libraries (to mark it, point with the cursor at the symbol next to the name of the
library and press ).
Parameters shown at this step in the right part of the converter window duplicate parameters in the
conversion options dialog (see section “Customization of Converter”).
After specifying libraries the elements of which can be modified upon conversion, press the button
[Next>] again to proceed to the next step.
To return to the step of selecting documents (for example, if you need to modify the list of selected files), use
the graphic button [