T-FLEX Parametric CAD. Fundamentals. 2D Design

Specifying List of Converted Documents
Converting Documents Created in Earlier Versions of T-FLEX CAD
The list of files selected for conversion is shown in the upper left field of the converter dialog. By default,
the list of files is empty.
If some documents were open in T-FLEX CAD at the time of calling the command,
the system will prompt you for closing them (this is required for successful converter
operation) and will automatically add them to the list of files to be converted. If
necessary, the user can remove some files from the list and/or add other T-FLEX
CAD documents to the list.
To add files to the list, the buttons (“Add files”) and (“Add folder”)
found on the toolbar of the converter can be used. These commands can be also
called from the textual menu.
The first button allows adding separate documents to the list, while the second one – all T-FLEX CAD
documents in the selected folder. If the selected folder has subfolders, the system will ask you, whether to
add those to the list.
To delete a file from the list, select it in the list and press the button (“Delete Files from List”) or the
button . To complete creation of the file list for conversion, press the graphic button [Next>].
In the progress of conversion, the system may automatically decide to add to the conversion list the
necessary fragment files of the assemblies being converted, upon analyzing the structure of the model to be
converted. This behavior can be controlled by a conversion parameter (see section “Customization of
Converter”).
757