T-FLEX Parametric CAD. Fundamentals. 2D Design

Fundamentals. Two-Dimensional Design
Unset Roughness Symbol
738
Keyboard Textual Menu Icon
“Title Block|Unset
Roughness|Insert”
After calling this command, the roughness parameters window will appear (see the chapter “Roughness
Symbols”). Once the parameters are defined, the roughness symbol will appear on the drawing.
Keyboard Textual Menu
"Title Block|Unset
Roughness|Properties"
Icon
This command serves to edit roughness properties.
Position of the unspecified roughness symbol is defined by the special hidden “Roughness”
element created inside the title block document.
Updating Title Block
While working on a drawing, you may need to modify some layout parameters, for example, move the title
blocks into a new position. In such a case, the position of the applied drawing notes and unset roughness
symbol will remain unchanged. To have such elements positioned according to the new title blocks position,
there is the command:
Keyboard Textual Menu Icon
"Title Block|Update"
When this command is called, a window appears, in which you can mark the layout elements that you need
to update (Title Block, Drawing Notes, Unset Roughness Symbol).
Parameters
To set up layout parameters, there is the command:
Keyboard Textual Menu Icon
"Title Block|Customize"
After calling this command, a dialog window appears on the screen with two tabs.
"Title Blocks" tab
This tab contains the list of title block types used for layouts. You can edit this list using the buttons
[Edit], [Add], [Delete]. The first two buttons call the same dialog window, only in the first case it is
used for an existing type, and in the second - for a new one.