T-FLEX Parametric CAD. Fundamentals. 2D Design

Document Protection in T-FLEX CAD
Upon calling the command, a dialog will be displayed on the screen in which you can select one of the
following actions:
To modify document protection, do the following steps:
1. By using the option “Set or Modify Access Rights for Documents”, protect the intended documents by
the sets of access types.
2. In the case of “By password”-type protection, the developer shall use the option “Generate Password
for Document or Library” and generate the password for a user to access a document by the key ID
received from the user.
The option “Get Current HASP Plug ID” allows the user to check the key ID currently installed on his
machine.
Setting Access to Documents
Upon selecting the option “Set or Modify Access Rights for Documents”, the dialog will be launched for
selecting files subject to setting or modifying the access.
Use the buttons [Add files…] and [Add Folder…] provided in the dialog for selecting the separate
files or specifying a folder whose files will be added to the list.
To set protection on files, their version must be the same as the current T-FLEX CAD version. The selected
files will be added to the list. The icon before a file indicates its current state.
• – Indicates the file in the format corresponding to the current version of T-FLEX CAD. In this
case, the file will be protected successfully.
• – Indicates the file in the format of one of the previous versions of T-FLEX CAD. In this case, the
file needs to be resaved in the current version. This can be done by the converter of the older versions
of files. Without that, the file protection will not be set.
• – The file is write-protected or used by another application. In this case, either clear the file
attribute “Read-only” or close this file in the other application, respectively. After that, retry protecting
the document.
719