T-FLEX Parametric CAD. Fundamentals. 2D Design
T-FLEX Parametric CAD. Fundamentals. 2D Design T-FLEX Parametric CAD. Fundamentals. 2D Design
Printing Documents scale of the image view will be modified). The same result can be achieved if after the first click on , a user releases the mouse button straightway, moves the cursor to the desired place (corresponding to the desired location of the image bound box) and presses the again. When moving the cursor, the scale magnitude is rounded off up to the second digit after the comma. A user can refuse to round off the scale by keeping the key pressed while moving the borders of the image bound box. In order to move the image over the page, after the image selection put the cursor in any place inside the image bound box. The cursor will take the following form: . Press and without releasing the mouse button, move the cursor to the required place on the page. Also, another way of working with the dragger can be used here – if after pressing , the mouse button is released, the image bound box will start to follow the cursor motion. Second click on will fix the image in a new place. When moving the image with the help of the mouse, the snapping of the selected image to the sides of other images on the current page of the document is performed (taking into account the value of the parameter “Editor/Snap Distance (Pixels)” in the options dialog of the document print module). 657
Fundamentals. Two-Dimensional Design 658 It is also possible to move the image with the help of the keyboard keys , , , . Selected image can be also moved to another page of the base document. To do it, point with the mouse inside the image bound box, press and without releasing the pressed mouse bring the cursor to the tab of the desired page. The selected page will be automatically opened in the preview area. After that, it will remain only to place the image on that page and release the mouse button. If after the image selection, a user presses and immediately releases the mouse button, the translation will be completed after the second click of the (already on the selected page of the pack). The scale, the placement page and the location of the selected image within that page can be also modified with the help of the command “Edit Image Properties…”: Keyboard Textual menu Icon «Image|Properties…» Upon invoking this command, the dialog window “Image properties” with the parameters of the selected image is opened: Picture. This field carries picture ID in the base document of the pack. Source File. Path of the source file with the given image Displayed Page. This parameter indicates the page in the source document used for creating the given image. Page. This parameters shows the page of the base document on which the current image will be placed. The drop down list allows a user to select another page of the base document for placing the image. Location. Parameters of this group define the image location within the page of the base document. Size. This is the parameters group showing the real dimensions of the given image (taking into account the specified scale).
- Page 608 and 609: Editing Fragments The common variab
- Page 610 and 611: Bill of Materials Working with BOM
- Page 612 and 613: Bill of Materials Attention: the ch
- Page 614 and 615: BOM Composition Any BOM is composed
- Page 616 and 617: The icons for managing the list ele
- Page 618 and 619: Bill of Materials The table on the
- Page 620 and 621: Creating BOM on New Drawing Page or
- Page 622 and 623: Switching Between the Assembly and
- Page 624 and 625: Bill of Materials To reorder the gr
- Page 626 and 627: Bill of Materials “Groups” Tab
- Page 628 and 629: Bill of Materials Standard. Present
- Page 630 and 631: Bill of Materials Substring from en
- Page 632 and 633: Bill of Materials On the main toolb
- Page 634 and 635: To have a BOM row ignored when sett
- Page 636 and 637: Bill of Materials If the icon is in
- Page 638 and 639: BOM Export Bill of Materials For ex
- Page 640 and 641: Creating and Editing BOM Prototype
- Page 642 and 643: Creating prototype for BOM located
- Page 644 and 645: Format Paragraph Parameters of cha
- Page 646: Bill of Materials Save this file. T
- Page 649 and 650: Fundamentals. Two-Dimensional Desig
- Page 651 and 652: Fundamentals. Two-Dimensional Desig
- Page 653 and 654: Fundamentals. Two-Dimensional Desig
- Page 655 and 656: Fundamentals. Two-Dimensional Desig
- Page 657: Fundamentals. Two-Dimensional Desig
- Page 661 and 662: Fundamentals. Two-Dimensional Desig
- Page 663 and 664: Fundamentals. Two-Dimensional Desig
- Page 665 and 666: Fundamentals. Two-Dimensional Desig
- Page 667 and 668: Fundamentals. Two-Dimensional Desig
- Page 669 and 670: Fundamentals. Two-Dimensional Desig
- Page 671 and 672: Fundamentals. Two-Dimensional Desig
- Page 673 and 674: Fundamentals. Two-Dimensional Desig
- Page 675 and 676: Fundamentals. Two-Dimensional Desig
- Page 677 and 678: Fundamentals. Two-Dimensional Desig
- Page 679 and 680: Fundamentals. Two-Dimensional Desig
- Page 681 and 682: Fundamentals. Two-Dimensional Desig
- Page 683 and 684: Fundamentals. Two-Dimensional Desig
- Page 685 and 686: Fundamentals. Two-Dimensional Desig
- Page 687 and 688: Fundamentals. Two-Dimensional Desig
- Page 689 and 690: Fundamentals. Two-Dimensional Desig
- Page 691 and 692: Fundamentals. Two-Dimensional Desig
- Page 693 and 694: Fundamentals. Two-Dimensional Desig
- Page 695 and 696: Fundamentals. Two-Dimensional Desig
- Page 697 and 698: Fundamentals. Two-Dimensional Desig
- Page 699 and 700: Fundamentals. Two-Dimensional Desig
- Page 701 and 702: Fundamentals. Two-Dimensional Desig
- Page 703 and 704: Fundamentals. Two-Dimensional Desig
- Page 705 and 706: Fundamentals. Two-Dimensional Desig
- Page 707 and 708: Fundamentals. Two-Dimensional Desig
<strong>Fundamentals</strong>. Two-Dimensional <strong>Design</strong><br />
658<br />
It is also possible to move the image with the help of the keyboard keys , , , .<br />
Selected image can be also moved to another page of the base document. To do it, point with the mouse<br />
inside the image bound box, press and without releasing the pressed mouse bring the cursor to the tab of<br />
the desired page. The selected page will be automatically opened in the preview area. After that, it will<br />
remain only to place the image on that page and release the mouse button. If after the image selection, a user<br />
presses and immediately releases the mouse button, the translation will be completed after the second<br />
click of the (already on the selected page of the pack).<br />
The scale, the placement page and the location of the selected image within that page can be also modified<br />
with the help of the command “Edit Image Properties…”:<br />
Keyboard Textual menu Icon<br />
«Image|Properties…»<br />
Upon invoking this command, the dialog window “Image properties” with the parameters of the selected<br />
image is opened:<br />
Picture. This field carries picture ID in the base document of<br />
the pack.<br />
Source File. Path of the source file with the given image<br />
Displayed Page. This parameter indicates the page in the<br />
source document used for creating the given image.<br />
Page. This parameters shows the page of the base document<br />
on which the current image will be placed. The drop down<br />
list allows a user to select another page of the base document<br />
for placing the image.<br />
Location. Parameters of this group define the image location<br />
within the page of the base document.<br />
Size. This is the parameters group showing the real dimensions<br />
of the given image (taking into account the specified scale).