T-FLEX Parametric CAD. Fundamentals. 2D Design

Printing Documents
scale of the image view will be modified). The same result can be achieved if after the first click on , a
user releases the mouse button straightway, moves the cursor to the desired place (corresponding to the
desired location of the image bound box) and presses the again.
When moving the cursor, the scale magnitude is rounded off up to the second digit after the comma. A user
can refuse to round off the scale by keeping the key pressed while moving the borders of the image
bound box.
In order to move the image over the page, after the image selection put the cursor in any place inside the
image bound box. The cursor will take the following form: . Press and without releasing the mouse
button, move the cursor to the required place on the page. Also, another way of working with the dragger can
be used here – if after pressing , the mouse button is released, the image bound box will start to follow the
cursor motion. Second click on will fix the image in a new place.
When moving the image with the help of the mouse, the snapping of the selected image to the sides
of other images on the current page of the document is performed (taking into account the value of
the parameter “Editor/Snap Distance (Pixels)” in the options dialog of the document print module).
657