T-FLEX Parametric CAD. Fundamentals. 2D Design

Fundamentals. Two-Dimensional Design
656
If this flag is disabled, after pressing [OK] the layout will be
completed. The images which could not be placed
automatically will have to be placed manually.
When this flag is on, after pressing[OK], the dialog for page
format selection, similar to that invoked by the command
“Page|Page Size…”, will appear. By default, the smallest
by area format which accommodates any visible images
counting gaps is set in this dialog (see chapter “Print Module
Options”). After selecting the format and pressing [OK], the
dialog “Page parameters” is closed, parameters of all pages
of the base document are automatically modified and the
repeated layout is carried out.
“Manual” Layout of Documents Pack
Print module allows a user to enter “manual” corrections into results of automatic layout: change location
and size (scale) of images, their distribution over the pages of the pack, etc.
To make the work with the created pack more convenient, the frames of all images in the preview area are
marked with a certain color. Nonactive images (i.e., not selected for modification of position and size) are
marked with a frame of dark-green (if they fit on the current page) or dark-red (if they do not fit on the
current page) color. If the placement of the nonactive image could not be adjusted upon automatic layout, the
color of its frame will be dark-red.
Selected (active) image is marked by default with sky-blue color (the color is specified in the command
“SO: Set System Options”, tab “Colors”, parameter “2D Elements Highlighting/Additional Color”). In
addition, at the corners of the frame of the selected image, square-markers are displayed.
A user can select the image in the list or directly in the preview window with the help of .
When bringing the cursor to the borders of the frame of the selected image or to the markers at the corners,
the cursor takes the form of a two-directional arrow ( , or ). If at this moment a user presses and
without releasing the pressed mouse button, moves the cursor, the image boundaries will move along with
the cursor. After releasing the mouse button, the size of the image bound box will be modified (thus, the