T-FLEX Parametric CAD. Fundamentals. 2D Design

Fundamentals. Two-Dimensional Design
How to define the position number?
Select the current position in the right hand side pane of the “BOM Leaders” dialog box. The corresponding
record will be highlighted in the BOM. In the BOM, select the record, whose number is to be assigned to the
current position. The position number in the drawing will change after the confirmation in the dialog.
How to insert a leader note before and after the position number?
638
Double-click on the current position in the right hand side pane of the “BOM Leaders” dialog box.
Enter the necessary information before or after the double braces. Upon the confirmation, this information
will be entered in the drawing.
How to add BOM leaders and link them to other positions?
To do this, select the record in the BOM, whose position number is to be added to the current position (the
left hand side pane of the “BOM Leaders” dialog box). (The current position should not be selected.) After
the call the command “New” in this dialog box:
Keyboard Textual Menu Icon
None
As a result, the position number of the selected record will be displayed in the right hand side pane of the
dialog box.
The position numbers in the drawing will follow the order of the current positions in the
right hand side pane of the discussed dialog box. Their placement can be modified by
using the commands: “Move Up”/ “Move Down” (the icons / ).
Upon the confirmation in this dialog, an additional BOM leader with the selected
position will be displayed in the drawing. Positions placement also depends on where the
additional BOM leaders are located, above or below. The BOM leader placement for the
current document is defined in the parameters of the command “IN: Create Leader
Note”.
A BOM leader can be deleted using the command “Delete”:
Keyboard Textual Menu Icon
None