T-FLEX Parametric CAD. Fundamentals. 2D Design

«Bottom-Up» Design
Section “Preview”. In this section of the properties window the
diminished image of the fragment on the selected page is shown. The
fixing vectors are also shown in this window if they exist. The desired
fixing vector can be selected in this window by pointing at it. The
selected fixing vector is shown with read color. The rest of the vectors
are blue.
Section “Options” contains the following parameters:
Auto create 3D fragment. (Available only for 3D version). In case this
flag is set on, right away after inserting the new 2D fragment the
corresponding 3D fragment is automatically created with attachment
by default (without using the coordinate system).
Auto create. When turning on this flag, the process of inserting the fragment will be finished automatically
straightway after specifying the fixing points or the points of the fixing vector of the fragment.
Create internal fragment. This parameter allows a user to create an internal fragment, the contents of
which are stored in the assembly drawing, but not in the external file.
In the dialog of the fragment parameters (option ) the following parameters can be specified additionally:
Priority. Defines the priority of the fragment in the assembly drawing. This is used for changing the order
of drawing fragments within the current document and for the fragment hidden line removal. Priority is
represented by an integer, positive or negative. Fragments with lower priority will be drawn in the
screen prior to the fragments with higher priority. The priority of the current (assembly) drawing is
equal to “0” by default.
Level. Sets the fragment level.
Layer. Sets the fragment layer.
The button “Options”. Provides a shortcut to defining the system parameters for handling fragments. The
parameters in this dialog are the same as those on the tab “Fragments” of the command “SO: Set
System Options”. See the chapter “Customizing System”.
597