T-FLEX Parametric CAD. Fundamentals. 2D Design

Fundamentals. Two-Dimensional Design
596
Additionally, a graphic button [Include in BOM] will be provided for displaying the window with the
list of BOMs existing in the current document, and the settings of the fragment contribution to each of them.
If necessary, you can select any BOM from the list and modify the setting of the fragment contribution to the
selected BOM. Besides, for the settings “Include With BOM” and “Include BOM Only”, you can select a
specific BOM existing in the fragment, from the list “Include in Bill of Materials”.
Alternatively, the way of the current fragment contribution to the assembly BOM can be specified
by the command “BI: Include in Bill of Materials”.
The section “Variables” allows a user to specify the values for the
fragment external variables.
This section is present in the command's properties window
only if the fragment being inserted has external variables.
Both the list of variables and the user-defined dialog of the fragment
parameters (if it has been created in the document of the fragment being
inserted) can be used for specifying external fragment variables. The
choice of the desired way to work with the variables is made with the
help of the flag “List of variables”.
To make the work with user-defined dialogs more convenient,
the section «Variables» in the command's properties window
can be brought out as a separate window by pressing the button
. For bringing the dialog for specifying the external variables
inside the general dialog of properties window, it is enough to
close it (with the button ).
The section “Coordinates” can be used for specifying precise coordinate
values for the points of the fixing vector or the fragment fixing points if
these points are not being fixed to the elements of the drawing. The work
with the fields in this section is similar to that described in the chapter
“Sketch. Creating a Non-parametric Drawing. Automatic
parameterization mode” of this manual. The structure of the controls in
the section “Coordinates” changes depending on the situation: