T-FLEX Parametric CAD. Fundamentals. 2D Design

Fundamentals. Two-Dimensional Design
540
Radio Button:
On - defines the value to assign to the variable when switched on.
In the further description of the controls, only the elements will be mentioned that are specific to this control
element.
Dialog Box Creation
Let’s review the process of creating a dialog box
using the example from the chapter “Brief
Introductory Course” (section “Creating Parametric
Drawing”).
The files for the examples described in the present
Plate drawing example R31
chapter are located in the library
“Documentation examples” in the folder
50
70
“\2D Desigh\Controls”. The drawing being
considered is stored in the file “Sample plate
75
35
drawing.GRB”.
To modify parameters of the drawing, let’s introduce
a set of variables:
The variables height, width and width_1 are used
as parameters of the lines defining the part
dimensions;
150
The variables r_min and r_max define the radii of the conic-shape hole; flag_1 defines the visibility level
of the axes;
flag_3, size and $text define, respectively, the visibility level, the font size and the drawing title text;
flag_21 and flag_22 define, respectively, the visibility level of the linear dimensions and the circlereferencing
dimensions. Their values are driven by the variable dim_mode that controls the type of the
displayed dimensions (none, linear only, circle dimensions only or all dimensions).
100
50