T-FLEX Parametric CAD. Fundamentals. 2D Design

Hatches:
Text:
3D objects
“AREA” – hatch area;
“PERIMETER” - hatch perimeter;
“XMASS” - X-coordinate of center of mass;
“YMASS” – Y-coordinate of center of mass;
“HEIGHT” – text height;
“WIDTH” – text width;
“X”, “Y” – X and Y coordinates of text fixing point;
Measure Elements and Relations between Them
2D fragments: fragment parameters are defined by the values of the fragment’s real (numerical) variables.
In addition, the following parameters are available for 2D fragments:
“BoundBoxLeft” – left coordinate of bound box (X-coordinate);
“BoundBoxRight” – right coordinate of bound box (X-coordinate);
“BoundBoxTop” – top coordinate of bound box (Y-coordinate);
“BoundBoxBottom” – bottom coordinate of bound box (Y-coordinate);
“BoundBoxCenterX” –X-coordinate of bound box center;
“BoundBoxCenterY” –Y-coordinate of bound box center.
Operations:
“Area” – surface area;
“Mass” – body mass (according to the material density);
“Xmass”, “Ymass”, “Zmass” - X,Y,Z-coordinates of the center of mass;
“IX”, “IY”, “IZ” – Moments of inertia with respect to the axes X, Y, Z;
“IXY”, “IYZ”, “IZX” – Inertia value with respect to the planes XY, YZ, ZX;
“Volume” – volume;
for “Apply Material” operation the following additional parameter is used:
“MaterialArea” – total area of faces with the attached material;
for all 3D Arrays (except arrays of faces) the following additional parameter is used:
3D nodes:
“CopyCount” – actual number of copies in the array (with account of limitations and exclusions);
“POINTX”, “POINTY”, “POINTZ” - X, Y, Z-coordinates of a 3D node;
3D profiles:
“Area” - surface area of a 3D profile;
“Perimeter” - perimeter of a closed 3D profile or length of an open one;
3D paths:
“Perimeter” – length of a 3D path;
517