T-FLEX Parametric CAD. Fundamentals. 2D Design

Fundamentals. Two-Dimensional Design
Creating Relations with the Command “REL: Element Relations”
462
A special command “REL: Element Relations” serves to create, as well as hide/show and delete existing,
Relations:
Keyboard Textual Menu Icon
“Parameters|Relations”
The following options are available in the command automenu:
Create Relations for All Elements
Delete All Relations
Create Relations for selected Elements
Create Relations for parent Elements chain
Delete Relations mode
Exit command
There are three ways to create Relations:
1. Automatic creation of Relations for all construction elements in the current drawing. For this, you just
need to push the option after starting the command;
2. Manual creation of Relations for individual construction elements with the option . After calling the
option, select the construction elements in the 2D window, for which you need to create relations.
3. Manual creation of Relations for chains of dependent elements with the option . After calling the
option, select the element in the 2D window, which will be the last in the chain. Relations will be
created for the specified element through the entire chain of parent elements up to the base ones (those
that are independent of other construction elements).