T-FLEX Parametric CAD. Fundamentals. 2D Design

Fundamentals. Two-Dimensional Design
Exploding Drawing View
422
The command of exploding the drawing view can be found in the context
menu of the view in the command wait mode.
As a result of exploding, the object “drawing view” is removed. In the same
space, a group of standard elements of 2D drawing (nodes, graphic lines,
etc.) resembling the image of the given view is created. If the drawing view
image contains dimensions, then after exploding the view, the scale of the
dimensions is modified in such a way that dimension’s value remains
unchanged.
When exploding the drawing view, whose contents is clipped by hatch (for
example, when the drawing view was created as “Detailed Drawing View
with Caption”), the following rules apply:
• lines clipped by hatch (for example, lines of associate copy) are replaced
by standard graphic lines shortened according to the clippings on the
view;
• fragments clipped by hatch are copied into the resulting set of elements together with the clipping hatch;
• hatches, clipped on the original view, disappear after exploding the view.
Upon exploding, the page with the view can be removed or retained in the document. A query about the
necessity of removal is sent.