T-FLEX Parametric CAD. Fundamentals. 2D Design

Fundamentals. Two-Dimensional Design
414
After choosing the fixing node, the dynamic image of the created detail view attached to the cursor will
appear on the screen. The location of the detail view on the drawing has to be selected next. After snapping
the view, its location and size can be adjusted with the help of the markers for editing the drawing view.
To make the caption of the detail view change its location according to the modifications of the
drawing, it is recommended to fix the drawing view to the 2D node.
Before completing the detail view creation, the dialog for specifying parameters of the created view will
remain available in the command's properties window. In this dialog you can specify the precise values for
the fixing point of the view, and also the following parameters:
Copy Scale. This scale determines the scale with which the selected elements
of the drawing will be copied.
The group of parameters “Image” defines parameters of the drawing view
being created (these parameters can be also specified directly in the
drawing's window with the help of the markers on the view image):
Scale. The drawing scale of the drawing view, that is the scale with which
the drawing view page is shown in the view area;
Rotation Angle. Angle of rotation of the drawing view.
Group of parameters “Text” allows specifying parameters of the view
caption:
Letter (Text):. In this field the lettered caption for the created view is
shown (selected by the system automatically). If necessary, you can choose
another caption.
Auto Increment. When this flag is set, for each new detail view the
“available” letter is automatically selected. It is shown in the field of the
parameter “Letter (Text)”. When this flag is turned off, the automatic
selection of the lettered caption does not occur.
First Line. The text in the first line of the view caption. This parameter supports the special format. To
insert the lettered view caption (the value of the parameter “Letter (Text)”) into the line, the group of
symbols “” is used. To insert the copy scale caption (“1:1”, “1:2” ...) – the group of symbols
“”. By default, the string “ ()” is set for this parameter.
Underline. When this flag is set, the text in the first line of the view caption will be underlined.
Second Line. This parameter defines the text of the second line of the view caption.
Clip Image. When this parameter is set, the view image will be cropped by the drawing view borders.
Scale Line Width. If this parameter is set, the width of the graphic lines of the detail view will be scaled
according to the specified drawing scale of the view.
To complete view creation, use the option . For the view constructed, the caption will be automatically
created. The obtained view can be edited and augmented, if required.
Creating Detail View with Caption
Creating the detail view with the caption with the help of the option is an extension of the case of
creating just a detail view (the option ). The option creates the detail views clipped by the specified
contour and with automatic creation of the caption for the detail view on the given drawing.