T-FLEX Parametric CAD. Fundamentals. 2D Design

Chamfers
You can select a predefined type of a chamfer in the “Type” pane of the dialog from the menu of icons.
Radius/Distance. Defines the radius of the inscribed circle in
the case of the fillet-type chamfer, or the distance in the
case of the corner chamfer.
Angle. This parameter is accessible only when the corner
chamfer is selected, and defines the angle of the chamfer
being created.
Symmetrical. This parameter is accessible only when
making the corner chamfer. Setting this parameter grays
out the parameter “Angle”, since only the distance is
required for defining the symmetrical chamfer.
Style from original With this parameter set, the chamfermaking
line strokes will have the same parameters as the
graphic lines on which the chamfer is based. Otherwise,
those strokes will have the parameters currently used by
the command “G: Create Graphic Line” or “SK:
Create Sketch”.
Auto change Hatches. Setting this parameter causes automatic adjustment of the defining hatch to geometry
of the chamfer being created. It also makes possible creating a chamfer as a construction element at the
node through which the hatch contour is passing.
Show this dialog when command starts. If this parameter is set, this dialog box will be automatically
launched upon entering the command. If the parameter is cleared, you will have to call the dialog by the
option “Set command options” (the icon )
407