T-FLEX Parametric CAD. Fundamentals. 2D Design

Section Properties
Section View
Section Properties. The tab “Common”
The group “Text Parameters”:
Text. The text to be displayed next to the arrows. This
entry is filled automatically with a subsequent letter
of the alphabet, beginning with the letter “A”. If the
number of notations exceeds the number of letters in
the alphabet, the multiple-letter combinations are
used: AA, AB, AC, …, AAAAAAA, etc.
If necessary, you can manually type a text string of
an arbitrary length in this input box.
Additional Text. The input boxes of this parameter
allow entering different text for each arrow. The
specified text strings will be displayed next to the
text defined by the previous parameter.
Horizontal Offset. Defines the text offset from the
arrow in the outward direction along the leader, in the
model measurement units.
Vertical Offset. The text offset from the leader.
Standard. Defines the view notation standard. You can choose from the three options: the ISO standard, the
ANSI standard and “Default”.
In the case of using the last option, the standard is defined by the “Standard/Dimension” parameter setting
in the command “ST: Set Model Status”, the tab “Dimensions”. The ANSI standard permits displaying
the dashed line (the parameter “Show Dashed Line”).
DIN / ISO
A A
B
B
ANSI
A A
Color, Level, Priority, Layer and [Font] are defined in the same way as in other T-FLEX elements.
Remember that the size of the view notation symbol depends on the font size defined either in the parameters
of the particular element or in the command “ST: Set Model Status”, the tab “Font”.
B
B
397