T-FLEX Parametric CAD. Fundamentals. 2D Design

Angle. The slant angle in degrees with respect to the X-axis.
Step. The distance between hatch lines.
Second hatch. With this attribute set, hatching is done in two directions.
Line thickness. Defines the hatching line thickness.
Circular. With this flag on, hatching is done in concentric
circles with specified parameters (step, color, line thickness,
etc.). In the case attachment point is not selected, the position
of the center is defined by the system automatically.
Otherwise, the center is placed in the attachment point.
Fill parameters
Hatches and Fills
A fill type is defined by the “Blend Colors” options. You can make the
following choices in the drop-down list:
No. Filling is done with solid color. This hatch does not have additional
parameters, besides the common ones for all filling methods.
Linear. This fill uses a linear color transition. The scale displayed in the parameters dialog shows the fill
palette. By default, a scale of gray is used for the color transition (from white through tones of gray to
black).
The scale palette can be modified by defining arbitrary colors in arbitrary quantities.
To define a new color, double-click anywhere on the scale. A standard Windows dialog for defining
color will appear. After selecting a color and closing this window, the specified color will appear on the
297