T-FLEX Parametric CAD. Fundamentals. 2D Design

Fundamentals. Two-Dimensional Design
26
“File|Recent Files” and the command “FP: Create New Document Based on Prototype” (more
details on how to use these capabilities will be given in the chapter “Main Concepts of System Operation”).
The last chapter – “Welcome to T-FLEX CAD” – contains various useful links related to working with
T-FLEX CAD.
The dialog box “Start Page” is always visible on the screen when the standard settings of the system are
used. Its tab will be aligned with the tabs of the open documents of the system (see below). The view of this
dialog box can be controlled by using the flag “Customize|Tool Windows|Start Page”. This flag is
active during one T-FLEX CAD session, i.e. if the flag is disactivated, the dialog box “Start Page” will not
be shown in the current session, but upon the next start of the T-FLEX CAD the dialog box will be shown on
the screen again. Control of the view of the dialog box “Start Page” during all sessions can be carried out
through the dialog box of the command “SO: Set Systems Options” (parameter “Show Start Page on
Start” on the tab “Preferences”).
In addition to the dialog box “Start Page”, the main window of the T-FLEX CAD contains different service
windows and elements of control used in working with the system.