T-FLEX Parametric CAD. Fundamentals. 2D Design

,, or ,, for constructing a circle tangent to a circle and a spline.
,, or ,, for constructing a circle tangent to a circle and an ellipse.
Circles
This combination creates a circle tangent to another circle and a spline or an ellipse. Subsequently select a
circle and a spline (ellipse), using the options and () respectively. Then specify the radius
either by a click or by inputting in the property window or parameters dialog box (the option ).
,, or ,, for constructing a circle tangent to a spline and an ellipse.
,, for constructing a circle tangent to two splines.
,, for constructing a circle tangent to two ellipses.
This combination creates a circle, tangent to two splines or ellipses. Subsequently select the intended entities,
spline(s) and/or ellipse(s), using the options and/or . Then specify the radius either by clicking or
by inputting in the property window or parameters dialog box (the option ).
,
This combination creates a circle, concentric to a selected one, with the specified radius offset. Move the
cursor over a circle and type . Then define the radius offset by a click , or by an input in the property
window or circle parameters dialog box (the option ).
The offset is considered negative for the circles within, positive for the ones outside the defining circle.
,
This combination creates a circle, mirrored from another circle about a straight line. To select the symmetry
axis, move the cursor over a line and type . Then select a circle using .
215