T-FLEX Parametric CAD. Fundamentals. 2D Design

Fundamentals. Two-Dimensional Design
166
- Save all configurations – on saving the document, all configurations will be regenerated and saved
automatically.
- Don’t save configurations.
[Fragment…] button brings up a dialog box for defining the fragment attributes on inserting the document
as a fragment.
Insert using Priority value. Setting this attribute allows to
define a priority value to be assigned to the fragment on
inserting into an assembly drawing.
Disable Edit In Place. When set, editing this document in the
assembly context is prohibited.
Enable Draggers on Edit. If set, the draggers will be enabled
for this assembled 2D fragment in the fragment editing mode.
The draggers allow modifying the external variables of the
fragment by using the mouse.
Don’t show Variables List on Edit. This option hides “Preview”
and “Variables List” flags in the fragment parameters dialog box on editing. The option works only for
the custom dialog boxes of fragment variables.
Use Status of. This parameter allows specifying what settings of the drawing will be used upon inserting the
given document into the assembly as a fragment:
Default. The default settings specified in the assembly for the parameters of the 2D fragment will be
used;
Fragment Document. The settings of the current document will be used;
Current Document. The settings of the assembly drawing will be used.
Default Fixing Vector. This parameter sets the main fixing vector used upon insertion of the given
document as a 2D fragment. This parameter duplicates the corresponding flag in the properties of the fixing
vector.