T-FLEX Parametric CAD. Fundamentals. 2D Design

Load Previous Session Document on Start. If this flag is
set, then upon the next start of T-FLEX CAD the
documents will be automatically loaded that were open at
the time of closing the previous system session.
Number of “Recent Files” in Menu. Defines the number of
items in the list of files opened in recent sessions. The
number should not be greater than 16. This setting affects the
menu “File|Recent Files” and the “Start Page” dialog box.
Paper Sizes. This button brings up a dialog box for editing
the list of drawing paper sizes. This list can be edited in the
drawing customization functionality (the “Model Status”
dialog box, “General” tab under the “Customize|Status”
command).
When adding a new element to the list or editing an existing
one, the Format Properties dialog box comes up.
The dialog allows setting Name, Width and Height of a
common or custom format. It also defines the measurement
Units of the T-FLEX CAD system.
Besides, one can set the parameters for dividing the drawing
into Zones:
Step. Defines the X and Y dimensions of one zone.
Offset. Defines the X and Y offsets of the area being
divided into zones with respect to the point (0,0).
First char, X and Y. Define the characters to begin with
when itemizing the zone columns and rows respectively.
Number, X and Y. The number of zone columns and
rows respectively.
Direction. Defines the itemization direction for zones:
left to right or right to left, top down or bottom up.
First displayed symbol. Defines, which of the zonedefining
symbols (in the X or Y axis), will stand first in
its notation.
Customizing System
133