T-FLEX Parametric CAD. Fundamentals. 2D Design

Main Concepts of System Operation
into two equal panes. The user is not prompted for the window type, instead, a 3D window pane is created on
the right-hand side.
If the window is split horizontally into two panes, then two more 3D window panes will be instantly created
by pressing the button. If the window is already split vertically into two panes, pressing the button closes the
second window. If the window is split both vertically and horizontally into four panes, pressing the button
will close the right pair of the panes at once. The button on the vertical ruler works accordingly. Such buttons
exist in 2D windows only.
If a window is split into panes, for example vertically, then the vertical ruler is used for both parts. Actions
performed with this ruler are reflected in the pane which is currently active. In the case of vertical division
each pane has its own horizontal ruler. If the window is split horizontally, then two vertical and one common
horizontal rulers are used. If the window is split into four panes, then four rulers work, their actions are
reflected in the pane which is currently active.
To make a certain window pane active point at it with a cursor.
To get rid of window splitting it is enough to reduce the size of one of the panes up to zero. By reducing the
size in this way the pane will be removed.
Closing document window
To close the window of a document the button in the right upper corner of the window is used (with
standard arrangement of document tabs). Upon pressing this button the current window will be closed. If for
the given document several windows were open, then the rest of the windows remain open.
To close all windows of the current document at once the command “FCL: Close Model” can be used:
Keyboard Textual Menu Icon
«File|Close»
101