UbiSurfer - Maplin Electronics

(F) Network Connections:
The UbiSurfer can connect to the Internet through a variety of ways. At any time when within phone signal areas, just opening the
UbiSurfer browser will automatically connect you that way. Alternatively, you can connect via a LAN connection, via WiFi, or via
external USB modems which you may want to use. Listed here are the methods for connecting each of these ways.
1) RJ45 (LAN) Connection:
This connection will be automatic. All one requires to do is to connect a functioning RJ45 (Ethernet Lan) cable into the port in the back
and the connection will happen.
2) Wireless Connection
a) Click the Datawind button on the UbiSurfer, then click on Programs / Internet / WiFi to open the wireless dial-up
settings interface, as shown in Figure 23.
Figure 23.
b) The UbiSurfer will automatically check for all wireless networks in the area and list them in the text box as shown in figure 24.
Figure 24.
c) Click on the network that you would like to connect to, to highlight it, and then click on Connect. The interface as seen in Figure 25,
will open.
Figure 25.
Chapter 4
Getting Started
19