JANUS? 2020 Hand-Held Computer (4MB) - Intermec

JANUS 2020 Hand-Held Computer User’s Manual (4MB) NF BC
INTERLNK.EXE (continued)
D-6
Limitations These commands do not work on devices running Interlnk:
CHKDSK FORMAT UNDELETE
DISKCOMP MIRROR UNFORMAT
DISKCOPY SYS
Interlnk does not redirect network, CD-ROM drives, or any other device that
uses a redirection interface. For example, you cannot access a network drive
that was redirected before Interlnk was started.
Examples: If the Interlnk files are located in the INTERLNK directory on the host
computer’s drive C and you need to specify seven drives so that drives C
through G on the reader will be redirected, add this line to the CONFIG.SYS
file on the reader:
device=c:\interlnk\interlnk.exe /drives:7
If the Interlnk files are located in the root directory on drive D of the reader,
you used the serial port to connect to another computer, and you want to
start Interlnk without having the printers redirected, add this line to the
CONFIG.SYS file on the reader:
device=d:\interlnk.exe /com /noprinter /drives:7
To make Interlnk use a non-standard COM port whose address is 3F8, add
this line to your CONFIG.SYS file on the reader:
device=d:\interlnk.exe /com:3F8 /drives:7