JANUS? 2020 Hand-Held Computer (4MB) - Intermec

Turnaround Delay
12
NF BC Configuration Command Reference
Purpose: Defines the length of time the reader waits to respond after receiving data from
the host computer.
Default: 0 sec
Note: You must select the communications port and protocol before you set the
parameters that define the protocol. For help, see “Communications Protocol,
Configure” earlier in this chapter.
Syntax: IGdata
Acceptable values for data are:
0 0 ms
1 1 ms
2 2 ms
3 5 ms
4 10 ms
5 20 ms
6 50 ms
7 100 ms
Scan: One of these bar codes:
No Turnaround Delay Turnaround Delay, 1 ms
*$+IG0* *$+IG1*
*$+IG0* *$+IG1*
Turnaround Delay, 2 ms Turnaround Delay, 5 ms
*$+IG2* *$+IG3*
*$+IG2* *$+IG3*
Turnaround Delay, 10 ms Turnaround Delay, 20 ms
*$+IG4* *$+IG5*
*$+IG4* *$+IG5*
Turnaround Delay, 50 ms Turnaround Delay, 100 ms
*$+IG6* *$+IG7*
*$+IG6* *$+IG7*
12-95