JANUS? 2020 Hand-Held Computer (4MB) - Intermec

More documents

Recommendations

Info

$\AIT\AIT-IV Cognex DM7500 Quick Reference$

Display Mode, IRL 12 NF BC Configuration Command Reference Purpose: Determines how IRL displays and handles data. The reader has two IRL display modes: buffered and transparent. Default: Buffered Buffered display A buffered display formats the display text with a full block character and a Carriage Return Line Feed (CR LF) after each data record. When you run an IRL program, the CR LF is actually executed before the next IRL prompt. Transparent display A transparent display does not add a CR LF after each data record. Scanned data records are concatenated together. Autowrap and autoscroll features are disabled. When the cursor gets to the end of a line, it does not wraparound. When the cursor reaches the bottom of the display, it does not scroll up. You must include control codes in the IRL program to format the display and move the cursor around. For example, you can use a CR LF sequence to move down one display line or to scroll the display after the last line. Error messages are not displayed. Syntax: DMdata Acceptable values for data are: 0 Buffered 1 Transparent Scan: One of these bar codes: Buffered Display Mode *$+DM0* *$+DM0* Transparent Display Mode *$+DM1* *$+DM1* 12-47
JANUS 2020 Hand-Held Computer User’s Manual (4MB) NF BC Display Setup Purpose: Defines the number of lines and columns in the display image, the Video mode, at what line the display scrolls, and the character height. The reader’s video modes are used in the same way as on a PC. The reader’s display size is 16 lines or rows by 20 characters. You can use the display as a viewport to the reader’s virtual display of 25 lines by 80 characters. If you select the 25 x 80 display size, you can set the Video mode, character height, and scroll line; otherwise, those parameters are preset to match the display size. For help, see “How to Use the Reader’s Display” in Chapter 2. 12-48 Note: If you are working at the DOS prompt, Intermec recommends that you set the display size to 25 x 80 or you may see inconsistent display results. While you run an application, the reader reverts to Automatic Viewport Movement mode and scrolls at line 25 unless your application sets these values. When you exit the application, the reader restores your previous configuration values. Default: First digit: Display size 25 lines by 80 characters (25 x 80) Second digit: Video mode 3 (normal character width, Color mode) Third digit: Scrolls at line 16 Fourth digit: Normal character height Syntax: DSdata Acceptable values for data are four digits corresponding to: First digit: 0 25 x 80 (lines by characters) 1 16 x 20 2 8 x 20 3 16 x 10 4 8 x 10 Second digit: 0 Video mode 0 (double character width, monochrome) 1 Video mode 1 (double character width, color) 2 Video mode 2 (normal character width, monochrome) 3 Video mode 3 (normal character width, color) Third digit: 0 Scroll at line 25 1 Scroll at line 16 2 Scroll at line 8 Fourth digit: 0 Normal character height 1 Double character height Note: The JANUS reader display is a monochrome display. In Color Video mode, the display supports gray scales. Existing applications may have a more readable display by using either Monochrome or Color mode.
Page 1 and 2:
User’s Manual JANUS 2020 Hand-He
Page 3 and 4:
Intermec® Corporation 6001 36th Av
Page 5 and 6:
JANUS 2020 Hand-Held Computer User
Page 7 and 8:
Page 9 and 10:
Page 11 and 12:
Page 13 and 14:
Page 15 and 16:
Page 17 and 18:
Page 20 and 21:
Before You Begin NF BC Before You B
Page 22 and 23:
About This Manual NF BC Before You
Page 24 and 25:
NF BC Before You Begin Format Conve
Page 26 and 27:
NF BC Before You Begin Format Conve
Page 28:
1 Getting Started
Page 31 and 32:
Page 33 and 34:
Page 35 and 36:
Page 37 and 38:
Page 39 and 40:
Page 42 and 43:
2 Learning How to Use the Reader
Page 44 and 45:
JANUS 2020 Features Communications
Page 46 and 47:
nugget nuggetTYTR TYTRLeaning How t
Page 48 and 49:
* % F 5 nugget nuggetTYTR TYTRLeani
Page 50 and 51:
To use the Compound Function key Pr
Page 52 and 53:
Page 54 and 55:
Page 56 and 57:
Page 58 and 59:
Using the Large Numeric Keypad nugg
Page 60 and 61:
4 nugget nuggetTYTR TYTRLeaning How
Page 62 and 63:
Page 64 and 65:
Page 66 and 67:
Page 68 and 69:
Page 70 and 71:
f * nugget nuggetTYTR TYTRLeaning H
Page 72 and 73:
Page 74 and 75:
Locating the Communications Ports n
Page 76 and 77:
Page 78 and 79:
Page 80 and 81:
Page 82 and 83:
Page 84 and 85:
Defining the Reader’s Drives nugg
Page 86 and 87:
Using the Laser Scanner nugget nugg
Page 88 and 89:
Page 90 and 91:
NF BC 3 Learning About the Software
Page 92 and 93:
NF BC Learning About the Software 3
Page 94 and 95:
NF BC Learning About the Software W
Page 96 and 97:
Defining the Startup Files NF BC Le
Page 98 and 99:
AUTOEXEC.BAT (continued) Command Li
Page 100 and 101:
MS-DOS Startup Menu The default JAN
Page 102 and 103:
Summary of Methods for Changing the
Page 104 and 105:
Page 106 and 107:
Page 108 and 109:
NF BC Learning About the Software Y
Page 110 and 111:
Page 112 and 113:
Page 114 and 115:
NF BC Learning About the Software N
Page 116 and 117:
Page 118 and 119:
Page 120 and 121:
Page 122 and 123:
Creating and Using a Physical RAM D
Page 124 and 125:
NF BC Learning About the Software T
Page 126 and 127:
Page 128 and 129:
Page 130 and 131:
Understanding the Bar Code Wedge NF
Page 132 and 133:
NF BC Learning About the Software O
Page 134 and 135:
NF BC 4 Using PC Cards in the Reade
Page 136 and 137:
NF BC Using PC Cards in the Reader
Page 138 and 139:
Page 140 and 141:
Page 142 and 143:
To remove a PC card NF BC Using PC
Page 144 and 145:
Page 146 and 147:
Page 148 and 149:
The MCFORMAT main menu appears: NF
Page 150 and 151:
Page 152 and 153:
Page 154 and 155:
Page 156 and 157:
To turn on the power to the PC card
Page 158 and 159:
NF BC 5 Configuring the Reader
Page 160 and 161:
NF BC Configuring the Reader 5 This
Page 162 and 163:
About the Configuration Files NF BC
Page 164 and 165:
How to Configure the Reader NF BC C
Page 166 and 167:
NF BC Configuring the Reader 5 Sele
Page 168 and 169:
To create two INI files with differ
Page 170 and 171:
NF BC Configuring the Reader 5 The
Page 172 and 173:
NF BC Configuring the Reader 5 Make
Page 174 and 175:
NF BC Configuring the Reader 5 3. C
Page 176 and 177:
Bar Code Symbologies Table (continu
Page 178 and 179:
Communications Protocol Parameters
Page 180 and 181:
Communications Protocol Parameters
Page 182 and 183:
Operations Table (continued) NF BC
Page 184 and 185:
Operations Table (continued) NF BC
Page 186 and 187:
NF BC 6 Networking the Reader
Page 188 and 189:
NF BC Networking the Reader 6 This
Page 190 and 191:
JANUS Readers in a Radio Frequency
Page 192 and 193:
NF BC Networking the Reader Port Ho
Page 194 and 195:
Planning the Network Connection NF
Page 196 and 197:
NF BC Networking the Reader 6 PC St
Page 198 and 199:
NF BC Networking the Reader Configu
Page 200 and 201:
PC Standard Protocol Parameters •
Page 202 and 203:
NF BC Networking the Reader For exa
Page 204 and 205:
NF BC Networking the Reader 6 Loadi
Page 206 and 207:
NF BC Networking the Reader Method
Page 208 and 209:
NF BC Networking the Reader 6 Conne
Page 210 and 211:
Running Interlnk to Transfer Files
Page 212 and 213:
NF BC Networking the Reader 6 Examp
Page 214 and 215:
NF BC Networking the Reader Install
Page 216 and 217:
NF BC Networking the Reader 3. At t
Page 218 and 219:
NF BC Networking the Reader 6 3. Pr
Page 220 and 221:
NF BC Networking the Reader 6 To us
Page 222 and 223:
Type this command at the client’s
Page 224 and 225:
NF BC Networking the Reader 6 When
Page 226 and 227:
NF BC Networking the Reader Exiting
Page 228 and 229:
NF BC Networking the Reader Downloa
Page 230 and 231:
Example 2: Downloading an Executabl
Page 232 and 233:
NF BC Networking the Reader 6 Prepa
Page 234 and 235:
To make the reader the server NF BC
Page 236 and 237:
FTA Command Descriptions and Syntax
Page 238 and 239:
NF BC Networking the Reader 6 Editi
Page 240 and 241:
NF BC 7 Working With IRL
Page 242 and 243:
Learning About IRL NF BC Working Wi
Page 244 and 245:
NF BC Working With IRL You can load
Page 246 and 247:
The About menu contains these comma
Page 248 and 249:
NF BC Working With IRL Running an I
Page 250 and 251:
NF BC Working With IRL 7 You can al
Page 252 and 253:
NF BC Working With IRL Specifying t
Page 254 and 255:
NF BC Working With IRL 7 Including
Page 256 and 257:
Resuming IRL Programs NF BC Working
Page 258 and 259:
NF BC Working With IRL Freeing Enou
Page 260 and 261:
NF BC 8 Preparing the Reader for In
Page 262 and 263:
NF BC Preparing the Reader for Inte
Page 264 and 265:
Page 266 and 267:
Page 268 and 269:
Using an International Keypad NF BC
Page 270 and 271:
Page 272 and 273:
Page 274 and 275:
Page 276 and 277:
Page 278 and 279:
NF BC 9 Booting and Resetting the R
Page 280 and 281:
NF BC Booting and Resetting the Rea
Page 282 and 283:
Resetting the Reader NF BC Booting
Page 284 and 285:
6. The Boot Loader menu appears. Bo
Page 286 and 287:
Page 288 and 289:
To exit Storage mode NF BC Booting
Page 290 and 291:
Loading Flash Memory NF BC Booting
Page 292 and 293:
Page 294 and 295:
NF BC 10 Troubleshooting
Page 296 and 297:
nugget nuggethelCODE39 CODE39Troubl
Page 298 and 299:
Powering Up or Booting the Reader (
Page 300 and 301:
Operating the Reader nugget nuggeth
Page 302 and 303:
Operating the Reader (continued) Pr
Page 304 and 305:
Operating the Reader (continued) Pr
Page 306 and 307:
Other Boot Loader menu messages may
Page 308 and 309:
Page 310 and 311:
Running IRL Programs nugget nuggeth
Page 312 and 313:
Using PC Cards nugget nuggethelCODE
Page 314 and 315:
Using PC Cards (continued) Problem
Page 316 and 317:
Using DOS Commands and Applications
Page 318 and 319:
Using MakeDisk nugget nuggethelCODE
Page 320 and 321:
Using PutDisk nugget nuggethelCODE3
Page 322 and 323:
Using PutDisk (continued) Message E
Page 324 and 325:
Page 326 and 327:
Problems With the NiCad Battery Pac
Page 328 and 329:
NF BC 11 Reader Command Reference
Page 330 and 331:
11 NF BC Reader Command Reference T
Page 332 and 333:
Backspace 11 NF BC Reader Command R
Page 334 and 335:
Enter 11 NF BC Reader Command Refer
Page 336 and 337:
IRL File, Clear 11 NF BC Reader Com
Page 338 and 339:
IRL Program, Download 11 NF BC Read
Page 340 and 341:
Laser On and Off 11 NF BC Reader Co
Page 342 and 343:
Viewport Movement Viewport Down 11
Page 344 and 345: Viewport Right 11 NF BC Reader Comm
Page 346 and 347: Viewport Page Up 11 NF BC Reader Co
Page 348 and 349: NF BC 12 Configuration Command Refe
Page 350 and 351: 12 NF BC Configuration Command Refe
Page 352 and 353: Configuration Commands Listed by Ca
Page 354 and 355: Address, Multi-Drop 12 NF BC Config
Page 356 and 357: Automatic Shutoff 12 NF BC Configur
Page 358 and 359: Baud Rate 12 NF BC Configuration Co
Page 360 and 361: Beep Duration (continued) Beep Freq
Page 362 and 363: Beep Volume 12 NF BC Configuration
Page 364 and 365: Codabar (continued) Code 11 12 NF B
Page 366 and 367: Code 2 of 5 12 NF BC Configuration
Page 368 and 369: Code 39 12 NF BC Configuration Comm
Page 370 and 371: Code 39 (continued) 12 NF BC Config
Page 376 and 377: Command Processing 12 NF BC Configu
Page 378 and 379: Command Processing (continued) 12 N
Page 380 and 381: Disabling or Enabling Command Overr
Page 382 and 383: Communications Dock Port 12 NF BC C
Page 384 and 385: Communications Port, UART Restore 1
Page 386 and 387: Communications Protocol (continued)
Page 388 and 389: Activate 12 NF BC Configuration Com
Page 390 and 391: Data Bits 12 NF BC Configuration Co
Page 392 and 393: Display Backlight Timeout (continue
Page 396 and 397: Display Setup (continued) Scan: One
Page 398 and 399: Display Setup (continued) 8 x 20 (l
Page 400 and 401: EOM (End of Message) 12 NF BC Confi
Page 402 and 403: EOR (End of Record) 12 NF BC Config
Page 404 and 405: Intercharacter Delay 12 NF BC Confi
Page 406 and 407: Interleaved 2 of 5 (continued) Enab
Page 408 and 409: IRL End Program Block 12 NF BC Conf
Page 410 and 411: IRL PAK (Program Acknowledge) 12 NF
Page 412 and 413: IRL Run 12 NF BC Configuration Comm
Page 414 and 415: Key Code Look-Up Table 12 NF BC Con
Page 416 and 417: Keypad Clicker 12 NF BC Configurati
Page 418 and 419: Keypad, Numeric 12 NF BC Configurat
Page 420 and 421: MSI (continued) 12 NF BC Configurat
Page 422 and 423: Parity 12 NF BC Configuration Comma
Page 424 and 425: POL Purpose: Solicits or requests d
Page 426 and 427: Postamble (continued) 12 NF BC Conf
Page 428 and 429: Records Per Block (continued) Synta
Page 430 and 431: RES (Reset) Purpose: Enables or dis
Page 432 and 433: Scanner Mode 12 NF BC Configuration
Page 434 and 435: Scanner Timeout 12 NF BC Configurat
Page 436 and 437: SEL (Select) 12 NF BC Configuration
Page 438 and 439: Stop Bits 12 NF BC Configuration Co
Page 440 and 441: Timeout Delay (continued) 12 NF BC
Page 442 and 443: Turnaround Delay 12 NF BC Configura
Page 444 and 445:
UPC/EAN (continued) Scan: To disabl
Page 446 and 447:
Viewport Movement Keys 12 NF BC Con
Page 448 and 449:
Viewport Movement Steps (continued)
Page 450 and 451:
NF BC A Reader Specifications
Page 452 and 453:
NF BC Reader Specifications This ap
Page 454 and 455:
Data Communications NF BC Reader Sp
Page 456 and 457:
Default Configuration NF BC Reader
Page 458 and 459:
Operations Parameter Default Automa
Page 460 and 461:
Configuration Commands by Syntax NF
Page 462 and 463:
Configuration Commands by Syntax (c
Page 464 and 465:
Types of Memory Used in the Reader
Page 466 and 467:
NF BC Reader Specifications A RAM D
Page 468:
B Reader Keypad Charts
Page 471 and 472:
Page 473 and 474:
Page 475 and 476:
Page 477 and 478:
Page 479 and 480:
Page 481 and 482:
NF BC
Page 483 and 484:
Page 485 and 486:
Page 487 and 488:
Page 489 and 490:
Page 491 and 492:
Page 493 and 494:
Page 495 and 496:
Page 497 and 498:
Page 499 and 500:
Page 501 and 502:
Page 503 and 504:
Page 505 and 506:
NF BC
Page 507 and 508:
Page 509 and 510:
Page 511 and 512:
Page 513 and 514:
Page 515 and 516:
Page 517 and 518:
Page 519 and 520:
Page 522 and 523:
Glossary G Accumulate mode Operatin
Page 524 and 525:
Glossary G bar code density Number
Page 526 and 527:
Glossary G Code 11 A very high dens
Page 528 and 529:
Glossary G configuration command A
Page 530 and 531:
Glossary G edge triggering A scanne
Page 532 and 533:
Glossary G Graphics mode One of two
Page 534 and 535:
Glossary G IRL Desktop The IRL oper
Page 536 and 537:
Glossary G Multi-Drop address The a
Page 538 and 539:
Glossary G PC Standard communicatio
Page 540 and 541:
Glossary G reader command A reader
Page 542 and 543:
Glossary G serial communications Wi
Page 544 and 545:
Glossary G UPC/EAN Code A fixed len
Page 546:
I Index
Page 549 and 550:
Page 551 and 552:
Page 553 and 554:
Page 555 and 556:
Page 557 and 558:
Page 559 and 560:
Page 561 and 562:
Page 563 and 564:
Page 565:
show all

JANUS? 2020 Hand-Held Computer (4MB) - Intermec

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?