JANUS? 2020 Hand-Held Computer (4MB) - Intermec

Code 39 (continued)
12
NF BC Configuration Command Reference
Syntax: CBdata
Acceptable values for data must be three digits, corresponding to:
First digit: 0 Disabled
1 Enabled with no check digit
2 Enabled with check digit
3 HIBC (Health Industry Bar Code)
4 With AIAG check digit
Second digit: 0 Discard check digit
1 Transmit check digit
Third digit: 0 Code 39 non-full ASCII
1 Code 39 full ASCII
2 Code 39 mixed-full ASCII
Scan: To disable Code 39:
Note: Selecting HIBC Code 39 automatically sets the configuration to non-full ASCII
with the check digit transmitted.
Disable Code 39
*$+CB0*
*$+CB0*
Or: To enable Code 39:
1. Scan this bar code:
Enter Accumulate Mode / Enable Code 39
*+/$+CB*
*+/$+CB*
2. Scan one of these bar codes to set the first digit:
Without a Check Digit With a Check Digit
*1* *2*
*1* *2*
HIBC Code 39 With AIAG Check Digit
*3* *4*
*3* *4*
12-23