28.07.2013 Views

JANUS? 2020 Hand-Held Computer (4MB) - Intermec

JANUS? 2020 Hand-Held Computer (4MB) - Intermec

JANUS? 2020 Hand-Held Computer (4MB) - Intermec

SHOW MORE
SHOW LESS

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

NF BC Preparing the Reader for International Use<br />

8<br />

You can also copy files from the companion disks that are shipped with the<br />

reader.<br />

5. The command you type in Step 7 will copy the default startup files from<br />

C_FILES\COMMON to drive C, overwriting the startup files on your<br />

reader. If you need to customize the default AUTOEXEC.BAT or<br />

CONFIG.SYS, you should do so now in the C_FILES\COMMON directory.<br />

When Auto-Loader copies the startup files, it adds commands at the end of<br />

the startup files to configure the reader to operate in the language you<br />

chose when you installed Auto-Loader on your host computer.<br />

6. Make sure your current directory is the one where you installed the<br />

Auto-Loader batch files, or make sure that directory is listed in the path<br />

statement of your host computer’s AUTOEXEC.BAT file.<br />

7. Type this command on the host computer:<br />

loadnew [path\]filename [path\filename path\filename...]<br />

where:<br />

path is the drive and directory of the file or files to add to the<br />

image file and load to the reader.<br />

filename is the name of the file or files to add to the image file and load<br />

to the reader.<br />

You can include multiple path\filename and path\*.* parameters in the<br />

command. The path\*.* parameter loads all the files in a directory. For<br />

example:<br />

loadnew c:\janus\data.txt c:\atadrv\*.* c:\data\*.*<br />

8. Auto-Loader runs Intersvr on the host computer. When you see the<br />

Interlnk Server Status screen on the host computer, press to<br />

warm boot the reader and start Interlnk. Auto-Loader begins updating<br />

drive C.<br />

9. When the update is complete, the reader reboots automatically. Now you<br />

can exit Intersvr on the host computer by pressing Alt-F4. You see this<br />

message on the host computer:<br />

Drive C: Installation process completed<br />

10. Interlnk is still loaded in the reader’s memory. If you need the conventional<br />

memory to run other applications, press to warm boot the<br />

reader. Because Intersvr is no longer running on the host computer, a warm<br />

boot does not cause Interlnk to load itself into the reader’s memory.<br />

8-7

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!