JANUS? 2020 Hand-Held Computer (4MB) - Intermec

NF BC Working With IRL
You can load a protocol handler or run a program when you start the IRL
Desktop by including one or both of these parameters in the command:
irl -[portph] [filename]
where:
port is the number of the COM port for which you are loading the
protocol handler.
ph is the code for the protocol handler you want to load:
i Intermec protocol handler
p PC Standard protocol handler
r RF protocol handler
filename is the name of the IRL program to run.
7
For example, to load the Intermec protocol handler on COM1 and open the IRL
Desktop, type this command at the DOS prompt:
irl -1i
Or scan this bar code:
*IRL -1I*
*IRL -1I*
To load the PC Standard protocol handler on COM1, open the IRL Desktop,
and immediately begin running the STOCK.IRL program, type this command
at the DOS prompt:
irl -1p stock.irl
Note: If you start an IRL program from the DOS prompt, you will return to the DOS
prompt when you exit the program.
Closing the IRL Desktop
To close the IRL Desktop, select Exit from the File menu and press .
7-5