JANUS? 2020 Hand-Held Computer (4MB) - Intermec

NF BC Networking the Reader
6
Editing the FTA Initialization File
The FTA initialization file (FTA.INI) controls how the FTA operates. You may
need to modify INI parameters to match the timeouts with the speed of your
network. You can use a standard ASCII text editor to edit the file. This table
describes the parameters in the default FTA.INI file, which is stored on
Application companion disk 3:
Parameter in FTA.INI Description
HostOpenSessionTimeout=10000 Milliseconds FTA waits for the host to respond to an open
session request in which the reader is the client.
HostStartServerTimeout=10000 Milliseconds FTA waits for the host to respond to an open
session request in which the reader is the server.
ReceiveRecordTimeout=10000 Milliseconds FTA waits for the host to send the next data record
while downloading a file to the reader.
StartUploadTimeout=10000 Milliseconds FTA waits for the host to respond to a request to
begin uploading a file from the reader.
StartDownloadTimeout=10000 Milliseconds FTA waits for the host to respond to a request to
begin downloading a file to the reader.
HostServerReadTimeout=10000 Milliseconds FTA waits for the host to send a command to the
reader when the host is the client.
HostClientReadTimeout=65535 Milliseconds FTA waits for the host to send a command to the
reader when the host is the server.
SendRecordTimeout=10000 Milliseconds FTA waits for the reader to transmit a record to the
host.
JobRecoverAttempts=1 Number of times FTA attempts to recover a session with the host
after that session has been lost.
EndTransmitTimeout=65535 Milliseconds FTA waits for the host to acknowledge that a file
upload is complete.
TransmitResponseDelay=5000 Milliseconds FTA allows to elapse before it starts to upload a file
from the reader to the host after the host sent the command to
begin uploading the file.
ClearChannelTimeout=10000 Milliseconds FTA waits for data when the communications
channel is being cleared.
6-53