JANUS? 2020 Hand-Held Computer (4MB) - Intermec

JANUS 2020 Hand-Held Computer User’s Manual (4MB) NF BC
FTA Command Descriptions and Syntax (continued)
Command Description Syntax
OPEN Establishes a connection with the
host computer.
PUT Copies a file from the reader to the
host computer.
RUPGRADE Upgrades the reader’s drive C from
the host. Stands for “remote
upgrade.”
SERVER Identifies the reader as the server, not
the client. You will type all
subsequent FTA commands at the
host.
6-52
o [port]
where:
port can be the COM port for the
connection. If you do not specify a
port, the application uses the first port
with an active protocol handler. Once a
connection is open, you can type other
FTA commands or type to exit.
p rfile [hfile]
where:
rfile is the path and filename of the file to be
transferred from the reader to the host.
hfile is the destination path and filename on
the host. If you do not specify an hfile
name, the rfile name is used.
r file c
where:
file is the path and filename of the image
file on the host computer, and C is the
drive to be upgraded.
s [port]
where:
port is the COM port for the connection. If
you do not specify a port, the
application uses the first port with an
active protocol handler.