JANUS? 2020 Hand-Held Computer (4MB) - Intermec

JANUS 2020 Hand-Held Computer User’s Manual (4MB) NF BC
6-42
Typing Commands at the DOS Prompt
You can use a DOS command line instead of the menu interface to transmit
and receive files. The syntax for the command is:
cmgr [-reader_portph] -phost_port -stype -f[path\]file
where:
reader_port is the number of the reader’s COM port.
ph is the name of the protocol handler:
i Intermec protocol handler
p PC Standard protocol handler
r RF protocol handler
host_port is the number of the host computer’s COM port.
type indicates whether you are transmitting or receiving:
t to transmit
r to receive
path is the directory for the file you are transmitting or receiving. If
you omit the path, the current working directory is used.
file is the name of the file you are transmitting or receiving.
For example, to load the PC Standard protocol handler on the reader’s COM1
and transmit a file called TEST.DAT from the host computer’s COM1, type this
command at the reader’s DOS prompt:
cmgr -1p -p1 -st -ftest.dat